文摘
Integrating polymers with inorganic nanostructures is difficult due to wetting and surface energy considerations. In this paper, we developed an electropolymerization method to grow conformal polymers on high aspect ratio nanostructures. Our method is shown to improve the polymer filling rate inside the nanostructures and can be used in the development of efficient hybrid solar cells. As an example, we have studied the hybrid system of electropolymerized polythiophene (e-PT) on ZnO planar and nanorod substrates using surface characterization methods. Although unsubstituted polythiophene is not the ideal polymer material for high efficiency solar cells, it is an excellent choice for studying basic bonding and morphology in hybrid structures. We find that e-PT is covalently bound to the polar ZnO planar substrate via a Zn鈥揝 bond, adopting an upright geometry. By contrast, no strong covalent bonding was observed between e-PT and ZnO nanorods that consist of nonpolar ZnO surfaces predominantly. We manipulated the polymer morphology along the ZnO nanorods by tuning the polarity of the solvent used in electropolymerization. Our electropolymerization approach to integrate the organic and inorganic phases aims at understanding the chemistry at the interface, and the electronic and morphological properties of the system. This work should be generally applicable to other conjugated polymers and nanostructures, and it contributes to an understanding of organic鈥搃norganic interfaces and structures that may be advantageous to a range of electronic/photonic applications.