Effect of Oil Phase Transition on Freeze/Thaw-Induced Demulsification of Water-in-Oil Emulsions
详细信息    查看全文
文摘
Recently, there has been an increasing interest in the breakage of water-in-oil (W/O) emulsions by the freeze/thaw method. Most of the previous works focused on the phase transition of the water droplet phase. This paper emphasizes the effect of continuous oil phase transition. A series of oils with different freezing points were used as oil phases to produce model emulsions, which were then frozen and thawed. The emulsion whose oil phase froze before the water droplet phase did (OFBW) on cooling was readily demulsified with a dewatering ratio as high as over 80%, but the emulsion whose oil phase did not freeze when the water droplet phase did (NOFBW) was relatively hard to break. The difference in demulsification performance between them resulted from the distinction between their demulsification mechanisms via the analyses of the emulsion stability, emulsion crystallization/melting behaviors, oil phase physical properties, and wettability of the frozen oil phase, etc. For the OFBW emulsion, the first-frozen oil phase was ruptured by the volume expansion of the subsequently frozen droplet phase, and meanwhile, some liquid droplet phase was drawn into the fine gaps/crevices of the frozen oil phase to bridge droplets, which were considered to be essential to the emulsion breakage, whereas for the NOFBW emulsion, the demulsification was attributed to the collision mechanism proposed in our previous work. The findings may provide some criteria for selecting a proper oil phase in the emulsion liquid membrane (ELM) process and then offer an alternative approach to recycle the oil phase for continuous operation. This work may also be useful for emulsion stability against temperature cycling.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700