Optimization of Organotin Polymers for Dielectric Applications
详细信息 查看全文
- 作者：Gregory M. Treich ; Shamima Nasreen ; Arun Mannodi Kanakkithodi ; Rui Ma ; Mattewos Tefferi ; James Flynn ; Yang Cao ; Rampi Ramprasad ; Gregory A. Sotzing
- 刊名：ACS Applied Materials & Interfaces
- 出版年：2016
- 出版时间：August 24, 2016
- 年：2016
- 卷：8
- 期：33
- 页码：21270-21277
- 全文大小：508K
- 年卷期：0
- ISSN：1944-8252
文摘
Recently, there has been a growing interest in developing wide band gap dielectric materials as the next generation insulators for capacitors, photovoltaic devices, and transistors. Organotin polyesters have shown promise as high dielectric constant, low loss, and high band gap materials. Guided by first-principles calculations from density functional theory (DFT), in line with the emerging codesign concept, the polymer poly(dimethyltin 3,3-dimethylglutarate), p(DMTDMG), was identified as a promising candidate for dielectric applications. Blends and copolymers of poly(dimethyltin suberate), p(DMTSub), and p(DMTDMG) were compared using increasing amounts of p(DMTSub) from 10% to 50% to find a balance between electronic properties and film morphology. DFT calculations were used to gain further insight into the structural and electronic differences between p(DMTSub) and p(DMTDMG). Both blend and copolymer systems showed improved results over the homopolymers with the films having dielectric constants of 6.8 and 6.7 at 10 kHz with losses of 1% and 2% for the blend and copolymer systems, respectively. The energy density of the film measured as a D–E hysteresis loop was 6 J/cc for the copolymer, showing an improvement compared to 4 J/cc for the blend. This improvement is hypothesized to come from a more uniform distribution of diacid repeat units in the copolymer compared to the blend, leading toward improved film quality and subsequently higher energy density.