Incorporation of Water-Soluble and Water-Insoluble Ruthenium Complexes into Zirconium Phosphate Films Fabricated by the Layer-by-Layer Adsorption and Reaction Method

详细信息    查看全文

• 作者：Qifeng Wang ; Dingyi Yu ; Yue Wang ; Junqi Sun ; Jiacong Shen
• 刊名：Langmuir
• 出版年：2008
• 出版时间：October 21, 2008
• 年：2008
• 卷：24
• 期：20
• 页码：11684-11690
• 全文大小：255K
• 年卷期：v.24,no.20(October 21, 2008)
• ISSN：1520-5827

文摘

Water-soluble tris(2,2′-bipyridine)ruthenium(II) complex (Rubpy) and water-insoluble tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) complex (Rudpp) were successfully incorporated into zirconium phosphate (ZrPS) films fabricated by a facile layer-by-layer (LbL) adsorption and reaction method. Rubpy-incorporated ZrPS films were fabricated by the LbL adsorption and reaction method employing a mixture solution of Rubpy and phosphate salt. Rubpy was incorporated into ZrPS films during the formation of ZrPS layers because of the electrostatic interaction between them. Rudpp was dissolved in the mixture solution of aqueous phosphate salt and ethanol and was incorporated into ZrPS films through the formation of ethanol preintercalated ZrPS layers. The successful incorporation of Rubpy and Rudpp into ZrPS films was confirmed by UV−vis absorption spectroscopy. Rubpy and Rudpp have concentrations of 0.915 × 10¹⁴ and 3.23 × 10¹⁴ molecules/cm² in each ZrPS layer, respectively. Scanning electron microscopy measurements indicate that the as-prepared Rubpy-incorporated ZrPS films are smooth while the as-prepared Rudpp-incorporated ZrPS films are porous. The porous Rudpp-incorporated ZrPS films are suitable to use as oxygen sensors because the luminescence of Rudpp incorporated into the ZrPS films can be quenched by oxygen and the porous film structure facilitates the permeation of oxygen into and out of the film.