3D Optical Printing of Piezoelectric Nanoparticle鈥揚olymer Composite Materials
详细信息 查看全文
- 作者：Kanguk Kim ; Wei Zhu ; Xin Qu ; Chase Aaronson ; William R. McCall ; Shaochen Chen ; Donald J. Sirbuly
- 刊名：ACS Nano
- 出版年：2014
- 出版时间：October 28, 2014
- 年：2014
- 卷：8
- 期：10
- 页码：9799-9806
- 全文大小：524K
- ISSN：1936-086X
文摘
Here we demonstrate that efficient piezoelectric nanoparticle鈥損olymer composite materials can be optically printed into three-dimensional (3D) microstructures using digital projection printing. Piezoelectric polymers were fabricated by incorporating barium titanate (BaTiO3, BTO) nanoparticles into photoliable polymer solutions such as polyethylene glycol diacrylate and exposing to digital optical masks that could be dynamically altered to generate user-defined 3D microstructures. To enhance the mechanical-to-electrical conversion efficiency of the composites, the BTO nanoparticles were chemically modified with acrylate surface groups, which formed direct covalent linkages with the polymer matrix under light exposure. The composites with a 10% mass loading of the chemically modified BTO nanoparticles showed piezoelectric coefficients (d33) of 鈭?0 pC/N, which were over 10 times larger than composites synthesized with unmodified BTO nanoparticles and over 2 times larger than composites containing unmodified BTO nanoparticles and carbon nanotubes to boost mechanical stress transfer efficiencies. These results not only provide a tool for fabricating 3D piezoelectric polymers but lay the groundwork for creating highly efficient piezoelectric polymer materials via nanointerfacial tuning.