Carbon Nanotube Functionalization Decreases Osteogenic Differentiation in Aluminum Oxide Reinforced Ultrahigh Molecular Weight Polyethylene

详细信息    查看全文

• 作者：Anup Kumar Patel ; Pramanshu Trivedi ; Kantesh Balani
• 刊名：ACS Biomaterials Science & Engineering
• 出版年：2016
• 出版时间：August 8, 2016
• 年：2016
• 卷：2
• 期：8
• 页码：1242-1256
• 全文大小：1345K
• ISSN：2373-9878

文摘

Ultrahigh molecular weight polyethylene (UHMWPE) is one of the most preferred materials as an acetabular cup-liner for bone implant applications. The current work develops a correlation between wettability, protein adsorption with osteogenic differentiation upon reinforcement of functionalized carbon nanotube (f-CNT) and 10 wt % aluminum oxide (Al₂O₃) in compression molded UHMWPE composites. Phase characterization has confirmed the retention of CNTs after compression molding. The loading of 2 wt % f-CNT in UHMWPE has shown to increase the contact angle (CA, from 88.9° to ∼97.3°), decrease the surface free energy (SFE, 23.20 to ∼20.85 mJ/m²) and elicit enhanced adsorbed protein density (PD, from ∼0.26 to ∼0.32 mg/cm²) in comparison to that of virgin polymer. Similar trend also has observed with 5 and 10 wt % f-CNT reinforcement. Initially, a high density of L929 mouse fibroblast cells is observed for 10 wt % unfunctionalized CNT (u-CNT) loading (48 h of incubation) with high values of dispersion fraction of surface free energy (σ_d), i.e., 0.967, whereas a decrease in cell density after 48 h is attributed to significant apatite mineralization and low dispersion fraction (σ_d) of CNT–Al₂O₃–UHMWPE biocomposites. Interestingly, gene expression studies have corroborated low osteogenic differentiation (i.e., weaker intensity osteopontin and β-actin) in 2–10 wt % f-CNT reinforced Al₂O₃–UHMWPE biocomposites in comparison to that of similar wt % reinforcement of u-CNT. Thus, implant material can be engineered, (bulk or surface-modified), possessing osteoanalogous and cytocompatible properties based on f-CNT–Al₂O₃-reinforced UHMWPE nanocomposites.