Dominant Factors Governing the Rate Capability of a TiO2 Nanotube Anode for High Power Lithium Ion Batteries

详细信息    查看全文

• 作者：Hyungkyu Han ; Taeseup Song ; Eung-Kwan Lee ; Anitha Devadoss ; Yeryung Jeon ; Jaehwan Ha ; Yong-Chae Chung ; Young-Min Choi ; Yeon-Gil Jung ; Ungyu Paik
• 刊名：ACS Nano
• 出版年：2012
• 出版时间：September 25, 2012
• 年：2012
• 卷：6
• 期：9
• 页码：8308-8315
• 全文大小：502K
• 年卷期：v.6,no.9(September 25, 2012)
• ISSN：1936-086X

文摘

Titanium dioxide (TiO₂) is one of the most promising anode materials for lithium ion batteries due to low cost and structural stability during Li insertion/extraction. However, its poor rate capability limits its practical use. Although various approaches have been explored to overcome this problem, previous reports have mainly focused on the enhancement of both the electronic conductivity and the kinetic associated with lithium in the composite film of active material/conducting agent/binder. Here, we systematically explore the effect of the contact resistance between a current collector and a composite film of active material/conducting agent/binder on the rate capability of a TiO₂-based electrode. The vertically aligned TiO₂ nanotubes arrays, directly grown on the current collector, with sealed cap and unsealed cap, and conventional randomly oriented TiO₂ nanotubes electrodes were prepared for this study. The vertically aligned TiO₂ nanotubes array electrode with unsealed cap showed superior performance with six times higher capacity at 10 C rate compared to conventional randomly oriented TiO₂ nanotubes electrode with 10 wt % conducting agent. On the basis of the detailed experimental results and associated theoretical analysis, we demonstrate that the reduction of the contact resistance between electrode and current collector plays an important role in improving the electronic conductivity of the overall electrode system.

Keywords:

TiO₂; rate capability; lithium ion batteries