Analysis of the Acceleration Region in a Circulating Fluidized Bed Riser Operating above Fast Fluidization Velocities

详细信息    查看全文

• 作者：Esmail R. Monazam ; Lawrence J. Shadle
• 刊名：Industrial & Engineering Chemistry Research
• 出版年：2008
• 出版时间：November 5, 2008
• 年：2008
• 卷：47
• 期：21
• 页码：8423-8429
• 全文大小：200K
• 年卷期：v.47,no.21(November 5, 2008)
• ISSN：1520-5045

文摘

In commercial circulating fluidized bed (CFB) processes the acceleration zone greatly contributes to solids mixing, gas and solids dispersion, and particle residence times. A new analysis was developed to describe the relative gas−solids concentration in the acceleration region of a transport system with air as the fluidizing agent for Geldart-type B particles. A theoretical expression was derived from a drag relationship and momentum and continuity equations to describe the evolution of the gas−solids profile along the axial direction. The acceleration zone was characterized using nondimensional analysis of the continuum equations (balances of masses and momenta) that described multiphase flows. In addition to acceleration length, the boundary condition for the solids fraction at the bottom of the riser and the fully developed regions were measured using an industrial scale CFB of 0.3 m diameter and 15 m tall. The operating factors affecting the flow development in the acceleration region were determined for three materials of various sizes and densities in core annular and dilute regimes of the riser. Performance data were taken from statistically designed experiments over a wide range of Fr (0.5−39), Re (8−600), Ar (29−3600), load ratio (0.2−28), riser to particle diameter ratio (375−5000), and gas to solids density ratio (138−1381). In this one-dimensional system of equations, velocities and solid fractions were assumed to be constant over any cross section. The model and engineering correlations were compared with literature expressions to assess their validity and range of applicability. These expressions can be used as tools for simulation and design of a CFB riser and can also be easily coupled to a kinetics model for process simulation.