Ordering of Poly(3-hexylthiophene) in Solutions and Films: Effects of Fiber Length and Grain Boundaries on Anisotropy and Mobility

详细信息    查看全文

• 作者：Nabil Kleinhenz ; Nils Persson ; Zongzhe Xue ; Ping Hsun Chu ; Gang Wang ; Zhibo Yuan ; Michael A. McBride ; Dalsu Choi ; Martha A. Grover ; Elsa Reichmanis
• 刊名：Chemistry of Materials
• 出版年：2016
• 出版时间：June 14, 2016
• 年：2016
• 卷：28
• 期：11
• 页码：3905-3913
• 全文大小：672K
• 年卷期：0
• ISSN：1520-5002

文摘

Long-range ordering emerges in poly(3-hexylthiophene) (P3HT) solutions during time-dependent aggregation. Here, aggregation of P3HT in chloroform solution was induced by ultrasonication, aging, and combinations thereof. UV–vis spectroscopy and polarized optical microscopy demonstrated that long-range ordering in the solution and subsequently the solid state depends on assembled P3HT fiber length, as determined by film atomic force microscopy. Ultrasonication induced the formation of fibers that were relatively short compared to those obtained through aging. As a result, ultrasonication afforded isotropic solutions and films, whereas aging afforded anisotropic solutions and films. The impact of fiber length and anisotropy on macroscopic charge transport performance was evaluated using an organic field-effect transistor (OFET) architecture. Both aged and sonicated solutions exhibited charge carrier mobilities that were an order of magnitude higher than that obtained for pristine samples. Aging of sonicated solutions enabled semiconducting thin films with significantly higher mobilities (1.5 × 10^–1 cm² V^–1 s^–1) than those of either solution processing technique. Furthermore, the results indicate that grain boundary morphology has a significant impact on macroscopic charge carrier mobility. Grazing incidence wide-angle X-ray scattering demonstrated that the combined sonication/aging method affords a solidified film where the semiconductor exhibits a highly edge-on orientation. The results suggest that the nucleation and growth of aggregates can be controlled via solution processing methods and thus may allow the manipulation of active layer orientation, crystal packing density, and crystallite size. The investigation provides insight into the conjugated polymer solution process parameters that impact polymer ordering and aggregation in solution and resultant thin films for high-performance organic electronic devices.