Etched Colloidal LiFePO4 Nanoplatelets toward High-Rate Capable Li-Ion Battery Electrodes
详细信息 查看全文
- 作者：Andrea Paolella ; Giovanni Bertoni ; Sergio Marras ; Enrico Dilena ; Massimo Colombo ; Mirko Prato ; Andreas Riedinger ; Mauro Povia ; Alberto Ansaldo ; Karim Zaghib ; Liberato Manna ; Chandramohan George
- 刊名：Nano Letters
- 出版年：2014
- 出版时间：December 10, 2014
- 年：2014
- 卷：14
- 期：12
- 页码：6828-6835
- 全文大小：471K
- ISSN：1530-6992
文摘
LiFePO4 has been intensively investigated as a cathode material in Li-ion batteries, as it can in principle enable the development of high power electrodes. LiFePO4, on the other hand, is inherently 鈥減lagued鈥?by poor electronic and ionic conductivity. While the problems with low electron conductivity are partially solved by carbon coating and further by doping or by downsizing the active particles to nanoscale dimensions, poor ionic conductivity is still an issue. To develop colloidally synthesized LiFePO4 nanocrystals (NCs) optimized for high rate applications, we propose here a surface treatment of the NCs. The particles as delivered from the synthesis have a surface passivated with long chain organic surfactants, and therefore can be dispersed only in aprotic solvents such as chloroform or toluene. Glucose that is commonly used as carbon source for carbon-coating procedure is not soluble in these solvents, but it can be dissolved in water. In order to make the NCs hydrophilic, we treated them with lithium hexafluorophosphate (LiPF6), which removes the surfactant ligand shell while preserving the structural and morphological properties of the NCs. Only a roughening of the edges of NCs was observed due to a partial etching of their surface. Electrodes prepared from these platelet NCs (after carbon coating) delivered a capacity of 鈭?55 mAh/g, 鈭?35 mAh/g, and 鈭?25 mAh/g, at 1 C, 5 C, and 10 C, respectively, with significant capacity retention and remarkable rate capability. For example, at 61 C (10.3 A/g), a capacity of 鈭?0 mAh/g was obtained, and at 122 C (20.7 A/g), the capacity was 鈭?0 mAh/g. The rate capability and the ease of scalability in the preparation of these surface-treated nanoplatelets make them highly suitable as electrodes in Li-ion batteries.