文摘
An isoindigo based 蟺-conjugated oligomer and polymer that contain cyclometalated platinum(II) 鈥渁uxochrome鈥?units were subjected to photophysical characterization, and application of the polymer in bulk heterojunction polymer solar cells with PCBM acceptor was examined. The objective of the study was to explore the effect of the heavy metal centers on the excited state properties, in particular, intersystem crossing to a triplet (exciton) state, and further how this would influence the performance of the organometallic polymer in solar cells. The materials were characterized by electrochemistry, ground state absorption, emission, and picosecond鈥搉anosecond transient absorption spectroscopy. Electrochemical measurements indicate that the cyclometalated units have a significant impact on the HOMO energy level of the chromophores, but little effect on the LUMO, which is consistent with localization of the LUMO on the isoindigo acceptor unit. Picosecond鈥搉anosecond transient absorption spectroscopy reveals a transient with 鈭?00 ns lifetime that is assigned to a triplet excited state that is produced by intersystem crossing from a singlet state on a time scale of 鈭?30 ps. This is the first time that a triplet state has been observed for isoindigo 蟺-conjugated chromophores. The performance of the polymer in bulk heterojunction solar cells was explored with PC61BM as an acceptor. The performance of the cells was optimum at a relatively high PCBM loading (1:6, polymer:PCBM), but the overall efficiency was relatively low with power conversion efficiency (PCE) of 0.22%. Atomic force microscopy of blend films reveals that the length scale of the phase separation decreases with increasing PCBM content, suggesting a reason for the increase in PCE with acceptor loading. Energetic considerations show that the triplet state in the polymer is too low in energy to undergo charge separation with PCBM. Further, due to the relatively low LUMO energy of the polymer, charge transfer from the singlet to PCBM is only weakly exothermic, which is believed to be the reason that the photocurrent efficiency is relatively low.