Optimal Sensor Placement for Fault Diagnosis Using Magnitude Ratio

详细信息    查看全文

• 作者：Parham Mobed ; Jeevan Maddala ; Pratik Pednekar ; Debangsu Bhattacharyya ; Raghunathan Rengaswamy
• 刊名：Industrial & Engineering Chemistry Research
• 出版年：2015
• 出版时间：September 30, 2015
• 年：2015
• 卷：54
• 期：38
• 页码：9369-9381
• 全文大小：437K
• ISSN：1520-5045

文摘

Major performance losses occur in process industries due to failures that are not identified at the incipient stage. Early detection of such faults is also critical for the safety of the equipment, operating personnel, and other resources. When a fault occurs in a system, it can propagate and affect several process variables. Variables that need to be measured in order to detect and diagnose the faults have to be identified and chosen economically. An algorithmic approach for identifying the optimal number, type, and location of the sensors for fault detection and diagnosis is useful, particularly for large-scale, chemical process plants. In this work, previous algorithms for sensor placement that use signed directed graph (SDG) models for the process are enhanced to include magnitude ratio (MR) information to identify more promising sensor locations. Further, we also study the combination of fault evolution sequences (FES) already introduced in the literature and the MR information for effective fault diagnosis. This is achieved by including the idea of artificial sensors that represent pairwise sensors from the original list of possible sensors. Based on the MR and FES, the artificial sensors can assume discrete values, much like the SDG approach. A symmetric difference operator is used on both the original sensors (whose behaviors are modeled as before using SDG) and the artificial sensors to identify sensor placements. This approach elegantly incorporates the new MR and FES information in the original well-accepted SDG based sensor placement algorithms. Several case studies are presented to demonstrate the usefulness of the proposed approach.