Accelerated OH鈥?/sup> Transport in Activated Carbon Air Cathode by Modification of Quaternary Ammonium for Microbial Fuel Cells

详细信息    查看全文

• 作者：Xin Wang ; Cuijuan Feng ; Ning Ding ; Qingrui Zhang ; Nan Li ; Xiaojing Li ; Yueyong Zhang ; Qixing Zhou
• 刊名：Environmental Science & Technology
• 出版年：2014
• 出版时间：April 1, 2014
• 年：2014
• 卷：48
• 期：7
• 页码：4191-4198
• 全文大小：589K
• 年卷期：v.48,no.7(April 1, 2014)
• ISSN：1520-5851

文摘

Activated carbon (AC) is a promising catalyst for the air cathode of microbial fuel cells (MFCs) because of its high performance and low cost. To increase the performance of AC air cathodes, the acceleration of OH^{鈥?/sup> transport is one of the most important methods, but it has not been widely investigated. Here we added quaternary ammonium to ACs by in situ anchoring of a quaternary ammonium/epoxide-reacting compound (QAE) or ex situ mixing with anion exchange resins in order to modify ACs from not only the external surface but also inside the pores. In 50 mM phosphate buffer solution (PBS), the in situ anchoring of QAE was a more effective way to increase the power. The highest power density of 2781 卤 36 mW/m2, which is 10% higher than that of the control, was obtained using QAE-anchored AC cathodes. When the medium was switched to an unbuffered NaCl solution, the increase in maximum power density (885 卤 25 mW/m2) was in accordance with the anion exchange capacity (0.219 mmol/g). The highest power density of the anion exchange resin-mixed air cathode was 51% higher than that of the control, indicating that anion exchange is urgently needed in real wastewaters. Excess anchoring of QAE blocked both the mesopores and micropores, causing the power output to be inhibited.}