Simultaneous Reduction of Particulate Matter and NOx Emissions Using 4-Way Catalyzed Filtration Systems

详细信息    查看全文

• 作者：Jacob J. Swanson ; Winthrop F. Watts ; Robert A. Newman ; Robin R. Ziebarth ; David B. Kittelson
• 刊名：Environmental Science & Technology (ES&T)
• 出版年：2013
• 出版时间：May 7, 2013
• 年：2013
• 卷：47
• 期：9
• 页码：4521-4527
• 全文大小：401K
• 年卷期：v.47,no.9(May 7, 2013)
• ISSN：1520-5851

文摘

The next generation of diesel emission control devices includes 4-way catalyzed filtration systems (4WCFS) consisting of both NO_x and diesel particulate matter (DPM) control. A methodology was developed to simultaneously evaluate the NO_x and DPM control performance of miniature 4WCFS made from acicular mullite, an advanced ceramic material (ACM), that were challenged with diesel exhaust. The impact of catalyst loading and substrate porosity on catalytic performance of the NO_x trap was evaluated. Simultaneously with NO_x measurements, the real-time solid particle filtration performance of catalyst-coated standard and high porosity filters was determined for steady-state and regenerative conditions. The use of high porosity ACM 4-way catalyzed filtration systems reduced NO_x by 99% and solid and total particulate matter by 95% when averaged over 10 regeneration cycles. A 鈥渞egeneration cycle鈥?refers to an oxidizing (鈥渓ean鈥? exhaust condition followed by a reducing (鈥渞ich鈥? exhaust condition resulting in NO_x storage and NO_x reduction (i.e., trap 鈥渞egeneration鈥?, respectively. Standard porosity ACM 4-way catalyzed filtration systems reduced NO_x by 60鈥?5% and exhibited 99.9% filtration efficiency. The rich/lean cycling used to regenerate the filter had almost no impact on solid particle filtration efficiency but impacted NO_x control. Cycling resulted in the formation of very low concentrations of semivolatile nucleation mode particles for some 4WCFS formulations. Overall, 4WCFS show promise for significantly reducing diesel emissions into the atmosphere in a single control device.