Stable Aqueous Foams from Cellulose Nanocrystals and Methyl Cellulose

详细信息    查看全文

• 作者：Zhen Hu ; Richard Xu ; Emily D. Cranston ; Robert H. Pelton
• 刊名：Biomacromolecules
• 出版年：2016
• 出版时间：December 12, 2016
• 年：2016
• 卷：17
• 期：12
• 页码：4095-4099
• 全文大小：378K
• ISSN：1526-4602

文摘

The addition of cellulose nanocrystals (CNC) greatly enhanced the properties of methylcellulose (MC) stabilized aqueous foams. CNC addition decreased air bubble size, initial foam densities and drainage rates. Mixtures of 2 wt % CNC + 0.5 wt % MC gave the lowest density foams. This composition sits near the onset of nematic phase formation and also near the overlap concentration of methylcellulose. More than 94% of the added CNC particles remained in the foam phase, not leaving with the draining water. We propose that the nanoscale CNC particles bind to the larger MC coils both in solution and with MC at the air/water interface, forming weak gels that stabilize air bubbles. Wet CNC-MC foams were sufficiently robust to withstand high temperature (70 °C for 6 h) polymerization of water-soluble monomers giving macroporous CNC composite hydrogels based on acrylamide (AM), 2-hydroxyethyl methacrylate (HEMA), or polyethylene glycol diacrylate (PEGDA). At high temperatures, the MC was present as a fibrillar gel phase reinforced by CNC particles, explaining the very high foam stability. Finally, our CNC-MC foams are based on commercially available forms of CNC and MC, already approved for many applications. This is a “shovel-ready” technology.