Stripe-like Clay Nanotubes Patterns in Glass Capillary Tubes for Capture of Tumor Cells

详细信息    查看全文

• 作者：Mingxian Liu ; Rui He ; Jing Yang ; Wei Zhao ; Changren Zhou
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：March 30, 2016
• 年：2016
• 卷：8
• 期：12
• 页码：7709-7719
• 全文大小：809K
• ISSN：1944-8252

文摘

Here, we used capillary tubes to evaporate an aqueous dispersion of halloysite nanotubes (HNTs) in a controlled manner to prepare a patterned surface with ordered alignment of the nanotubes . Sodium polystyrenesulfonate (PSS) was added to improve the surface charges of the tubes. An increased negative charge of HNTs is realized by PSS coating (from −26.1 mV to −52.2 mV). When the HNTs aqueous dispersion concentration is higher than 10%, liquid crystal phenomenon of the dispersion is found. A typical shear flow behavior and decreased viscosity upon shear is found when HNTs dispersions with concentrations higher than 10%. Upon drying the HNTs aqueous dispersion in capillary tubes, a regular pattern is formed in the wall of the tube. The width and spacing of the bands increase with HNTs dispersion concentration and decrease with the drying temperature for a given initial concentration. Morphology results show that an ordered alignment of HNTs is found especially for the sample of 10%. The patterned surface can be used as a model for preparing PDMS molding with regular micro-/nanostructure. Also, the HNTs rough surfaces can provide much higher tumor cell capture efficiency compared to blank glass surfaces. The HNTs ordered surfaces provide promising application for biomedical areas such as biosensors.