Controlling Crystallinity in Graft Ionomers, and Its Effect on Morphology, Water Sorption, and Proton Conductivity of Graft Ionomer Membranes
文摘
To gain insight into the role of crystallinity and morphology on proton transport through solid polymer electrolytes, we synthesized graft copolymers, poly(vinylidene difluoride-co-chlorotrifluoroethylene)-g-polystyrene [P(VDF-co-CTFE)-g-PS], consisting of a hydrophobic, fluorous backbone and styrenic graft chain of varied length (DPstyrene = 39, 62, and 79), by graft atom transfer radical polymerization (ATRP). The polystyrene graft chains were subsequently sulfonated to different degrees to provide three series of polymers with controlled ion exchange capacity (IEC). The crystallinity and morphology of solution-cast membranes were examined by XRD and TEM, respectively. The grafting of the parent side chain is found to hinder crystallization of the fluorous backbone and the impact of the degree of sulfonation of the side chain on the crystallinity of the polymer is dependent on the graft length: No impact is found for medium and long graft lengths, but for short graft length copolymers (PS39), the degree of crystallinity in the sulfonated membranes is twice that of the unsulfonated membrane. A phase-separated morphology consisting of 2鈥? (卤1) nm ion-rich domains is observed for all of the graft copolymers. These graft copolymers allow access to very high IEC membranes (>3 mmol/g), which are insoluble in water. The shorter graft length series, P(VDF-co-CTFE)-g-SPS39, swells less in the intermediate IEC range (<3.0 mmol/g) because of its higher degree of crystallinity and lower PS to VDF ratio, and provides membranes with exceptionally high proton conductivity. Two graft series possessing similar weight fraction of PS but different graft density were also examined in order to evaluate the effect of graft density. It was found that lower graft density copolymers possess higher crystallinity and more contiguous PVDF domains, which allow high IEC membranes to be prepared that swell to lower extents.
Keywords:
proton exchange membranes; fuel cells; polymer synthesis; morphology; structure鈭抪roperty relationships; proton conductivity