Graphene Squeeze-Film Pressure Sensors

详细信息    查看全文

• 作者：Robin J. Dolleman ; Dejan Davidovikj ; Santiago J. Cartamil-Bueno ; Herre S. J. van der Zant ; Peter G. Steeneken
• 刊名：Nano Letters
• 出版年：2016
• 出版时间：January 13, 2016
• 年：2016
• 卷：16
• 期：1
• 页码：568-571
• 全文大小：262K
• ISSN：1530-6992

文摘

The operating principle of squeeze-film pressure sensors is based on the pressure dependence of a membrane’s resonance frequency, caused by the compression of the surrounding gas which changes the resonator stiffness. To realize such sensors, not only strong and flexible membranes are required, but also minimization of the membrane’s mass is essential to maximize responsivity. Here, we demonstrate the use of a few-layer graphene membrane as a squeeze-film pressure sensor. A clear pressure dependence of the membrane’s resonant frequency is observed, with a frequency shift of 4 MHz between 8 and 1000 mbar. The sensor shows a reproducible response and no hysteresis. The measured responsivity of the device is 9000 Hz/mbar, which is a factor 45 higher than state-of-the-art MEMS-based squeeze-film pressure sensors while using a 25 times smaller membrane area.