Novel CdS Hole-Blocking Layer for Photostable Perovskite Solar Cells

详细信息    查看全文

• 作者：Insung Hwang ; Kijung Yong
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：February 17, 2016
• 年：2016
• 卷：8
• 期：6
• 页码：4226-4232
• 全文大小：463K
• ISSN：1944-8252

文摘

Currently, the stability issue of the perovskite solar cells (PSCs) is one of the most critical obstacles in the commercialization of PSCs. Although incredible advances in the photovoltaic efficiencies of PSCs have been achieved in the past few years, research on the stability of PSCs has been relatively less explored. In this study, a new kind of CdS hole-blocking layer replacing the traditional compact TiO₂ layer is developed to improve the photostability of PSCs because the intrinsic oxygen vacancies of the TiO₂ surface are suspected to be the main cause for the photoinduced degradation of PSCs. As a result, PSCs with the CdS layer exhibit considerably improved photostability, maintaining over 90% of the initial efficiency after continuous sunlight illumination for 12 h, while the TiO₂ PSC retains only 18% of the initial efficiency under the same conditions. Charge-transfer characteristics related to photodegradation are investigated by various analyses including electrochemical impedance spectroscopy and open-circuit voltage decay and time-resolved photoluminescence decay measurements. the CdS PSC exhibits negligible degradation in the charge-carrier dynamics, while the TiO₂ PSC suffers from severely damaged characteristics like increased charge recombination rate, charge-transfer resistance, and reduced charge extraction rate.