Determination of the Zeta Potential of Porous Substrates by Droplet Deflection. I. The Influence of Ionic Strength and pH Value of an Aqueous Electrolyte in Contact with a Borosilicate Surface

详细信息    查看全文

• 作者：Dominik P. J. Barz ; Michael J. Vogel ; Paul H. Steen
• 刊名：Langmuir
• 出版年：2009
• 出版时间：February 3, 2009
• 年：2009
• 卷：25
• 期：3
• 页码：1842-1850
• 全文大小：241K
• 年卷期：v.25,no.3(February 3, 2009)
• ISSN：1520-5827

文摘

This paper presents a new method to determine the zeta potential of porous substrates in contact with a liquid. Electroosmosis, arising near the solid/liquid boundaries within a fully saturated porous substrate, pumps against the capillary pressure arising from the surface tension of a droplet placed in series with the pump. The method is based on measuring the liquid/gas interface deflection due to the imposed electric potential difference. The distinguishing features of our technique are accuracy, speed, and reliability, accomplished with a straightforward and cost-effective setup. In this particular setup, a bistable configuration of two opposing droplets is used. The energy barrier between the stable states defines the range of capillary resistance and can be tuned by the total droplet volume. The electroosmotic pump is placed between the droplets. The large surface area-to-volume ratio of the porous substrate enables the pumping strength to exceed the capillary resistance even for droplets small enough that their shapes are negligibly influenced by gravity. Using a relatively simple model for the flow within the porous substrate, the zeta potential resulting from the substrate−liquid combination is determined. Extensive measurements of a borosilicate substrate in contact with different aqueous electrolytes are made. The results of the measurements clarify the influence of the ionic strength and pH value on the zeta potential and yield an empirical relationship important to engineering approaches.