Substantiation of the cogeneration turbine unit selection for reconstruction of power units with a T-250/300-23.5 turbine

详细信息    查看全文

• 作者：A. E. Valamin ; A. Yu. Kultyshev ; T. L. Shibaev ; A. A. Gol’dberg…
• 关键词：steam turbine ; thermal cycle diagram ; reconstruction ; turbine unit arrangement ; basement of turbine unit ; live steam/reheat steam conditions ; last stage bucket
• 刊名：Thermal Engineering
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：63
• 期：11
• 页码：765-770
• 全文大小：138 KB
• 刊物类别：Engineering
• 刊物主题：Engineering Thermodynamics and Transport Phenomena
  Russian Library of Science
  
• 出版者：MAIK Nauka/Interperiodica distributed exclusively by Springer Science+Business Media LLC.
• ISSN：1555-6301
• 卷排序：63

文摘

The selection of a cogeneration steam turbine unit (STU) for the reconstruction of power units with a T-250/300-23.5 turbine is substantiated by the example of power unit no. 9 at the cogeneration power station no. 22 (TETs-22) of Mosenergo Company. Series T-250 steam turbines have been developed for combined heat and power generation. A total of 31 turbines were manufactured. By the end of 2015, the total operation time of prototype power units with the T-250/300-23.5 turbine exceeded 290000 hours. Considering the expiry of the service life, the decision was made that the reconstruction of the power unit at st. no. 9 of TETs-22 should be the first priority. The main issues that arose in developing this project—the customer’s requirements and the request for the reconstruction, the view on certain problems of Ural Turbine Works (UTZ) as the manufacturer of the main power unit equipment, and the opinions of other project parties—are examined. The decisions were made with account taken of the experience in operation of all Series T-250 turbines and the results of long-term discussions of pressing problems at scientific and technical councils, meetings, and negotiations. For the new power unit, the following parameters have been set: a live steam pressure of 23.5 MPa and live steam/reheat temperature of 565/565°C. Considering that the boiler equipment will be upgraded, the live steam flow is increased up to 1030 t/h. The reconstruction activities involving the replacement of the existing turbine with a new one will yield a service life of 250000 hours for turbine parts exposed to a temperature of 450°C or higher and 200000 hours for pipeline components. Hence, the decision has been made to reuse the arrangement of the existing turbine: a four-cylinder turbine unit comprising a high-pressure cylinder (HPC), two intermediate pressure cylinders (IPC-1 & 2), and a low-pressure cylinder (LPC). The flow path in the new turbine will have active blading in LPC and IPC-1. The information is also presented on the use of the existing foundations, the fact that the overall dimensions of the turbine unit compartment are not changed, the selection of the new turbine type, and the solutions adopted on the basis of this information as to LPC blading, steam admission type, issues associated with thermal displacements, etc.