Welding process of consumable double electrode with a single arc GMAW

详细信息    查看全文

• 作者：H. L. Wei (1)
  H. Li (1)
  Y. Gao (2)
  X. P. Ding (1)
  L. J. Yang (1)
  
  1. Tianjin Key Laboratory of Advanced Joining Technology ; Tianjin University ; Tianjin ; 300072 ; China
  2. Tianjin key Laboratory of High Speed Cutting and Precision Machining ; Tianjin University of Technology and Education ; Tianjin ; 300222 ; China
  
• 关键词：Double electrode ; Single arc ; Current ratio ; Metal transfer
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2015
• 出版时间：January 2015
• 年：2015
• 卷：76
• 期：1-4
• 页码：435-446
• 全文大小：6,139 KB
• 参考文献：1. Li KH, Zhang YM, Xu P, Yang FQ (2008) High-strength steel welding with consumable double-electrode gas metal arc welding. Weld J 87:57s鈥?4s
  2. Ma GH, Zhang YM (2012) A novel DE-GMAW method to weld steel tubes on simplified condition. Int J Adv Manuf Technol 63:147鈥?53 CrossRef
  3. Wu CS, Hu ZK, Zhang YM (2009) Suppression of weld-bead defects and increase in the critical welding speed during high-speed arc welding. Proc Inst Mech Eng B-J Eng Manuf 223:751鈥?57 CrossRef
  4. Wu CS, Hu ZH, Zhong LM (2012) Prevention of humping bead associated with high welding speed by double-electrode gas metal arc welding. Int J Adv Manuf Technol 63:573鈥?81 CrossRef
  5. Lu Y, Chen SJ, Shi Y, Li XR, Chen JS, Kvidahl L, Zhang YM (2014) Double-electrode arc welding process: Principle, variant, control and developments. J Manuf Process 16:93鈥?08 CrossRef
  6. Shi Y, Han RH, Huang JK, Yan S (2014) Numerical and experimental study of temperature field for double electrode gas metal arc welding. J Manuf Sci E-T ASME
  7. Li XR, Zhang YM, Kvidahl L (2013) Penetration depth monitoring and control in submerged arc welding. Weld J 92:48s鈥?6s
  8. Lu Y, Zhang YM, Kvidahl L (2013) Heat input reduction in fillet welding using bypass and root opening. Weld J 92:390s鈥?00s
  9. Shi Y, Shao L, Huang J, Gu Y (2013) Effects of Si and Mg elements on the microstructure of aluminum-steel joints produced by pulsed DE-GMA welding-brazing. Mater Sci Technol 29:1118鈥?124 CrossRef
  10. Zhang YM, Jiang M, Lu W (2004) Double electrode improve GMAW heat input control. Welding J 83:39鈥?1
  11. Li KH, Chen JS, Zhang YM (2007) Double-electrode GMAW process and control. Weld J 86:231C237
  12. Li KH, Zhang YM (2007) Metal transfer in double-electrode gas metal arc welding. J Manuf Sci Eng-Trans ASME 129:991鈥?99 CrossRef
  13. Wang ZZ, Zhang YM (2007) Image processing algorithm for automated monitoring of metal transfer in double-electrode GMAW. Meas Sci Technol 18:2048鈥?058 CrossRef
  14. Li KH, Wu CS (2009) Mechanism of metal transfer in DE-GMAW. J Mater Sci Technol 25:415鈥?18 CrossRef
  15. Shao Y, Wang ZZ, Zhang YM (2011) Monitoring of liquid droplets in laser-enhanced GMAW. Int J Adv Manuf Technol 57:203鈥?14 CrossRef
  16. Wang XW, Huang Y, Zhang YM (2013) Droplet transfer model for laser-enhanced GMAW. Int J Adv Mannuf Technol 64:207鈥?17 CrossRef
  17. Wang ZZ, Huang Y, Zhang YM (2013) Unsupervised droplet identification during the pulsed laser enhanced GMAW process. Int J Adv Manuf Technol 67(5-8):1449鈥?457 CrossRef
  18. Wu CS, Zhang MX, Li KH, Zhang YM (2007) Numerical analysis of double electrode gas metal arc welding process. Comp Mater Sci 39:416鈥?23 CrossRef
  19. Li KH, Zhang YM (2008) Consumable double-electrode GMAW Part I: the process. Weld J 87:11sC17s
  20. Li KH, Zhang YM (2008) Consumable double-electrode GMAW part II: Monitoring, modeling, and control. Weld J 87:44sC50s
  21. Li KH, Zhang YM (2010) Interval model control of consumable double-electrode gas metal arc welding process. IEEE T Autom Sci Eng 7:826鈥?39 CrossRef
  22. Wei HL, Li H, Yang LJ, Gao Y (2013) Consumable double electrode with a single arc GMAW. Int J Adv Manuf Technol 68:1539鈥?550 CrossRef
  23. Park HJ, Kim DC, Kang MJ (2012) The arc phenomenon by the characteristic of EN ratio in AC pulse GMAW. Int J Adv Manuf Technol 66:867鈥?75 CrossRef
  24. Kah P, Suoranta R, Martikaine J (2013) Advanced gas metal arc welding processes. Int J Adv Manuf Technol 67:655鈥?74 CrossRef
  25. Rao ZH, Zhou J, Tsai HL (2012) Determination of equilibrium wire-feed-speeds for stable gas metal arc welding. Int J Heat Mass Transfer 55:6651鈥?664 CrossRef
  26. Hu J, Tsai HL (2006) Effects of current on droplet generation and arc plasma in gas metal arc welding. J Appl Phys 100:053304 CrossRef
  27. Palani PK, Murugan N (2005) Selection of parameters of pulsed current gas metal arc welding. J Mater Process Technol 172:1鈥?0 CrossRef
  28. Kim YS, Eagar TW (1993) Metal transfer in pulsed current gas metal arc welding. Welding J 72:s279鈥搒287
  29. Lancaster (1986) The physics of welding, 2nd edn. Pergamon, New York
  30. Wang F, Hou WK, Hu SJ, Kannatey-Asibu E, Schultz WW, Wang PC (2003) Modeling and analysis of metal transfer in gas metal arc welding. J Phys D Appl Phys 36:1143鈥?152 CrossRef
  
• 刊物类别：Engineering
• 刊物主题：Industrial and Production Engineering
  Production and Logistics
  Mechanical Engineering
  Computer-Aided Engineering and Design
  
• 出版者：Springer London
• ISSN：1433-3015

文摘

Double-electrode gas metal arc welding (DE-GMAW) was recently developed to control the current through the workpiece at a desired level when the welding productivity was increased. A novel welding method entitled consumable double electrode with a single arc GMAW (consumable DESA-GMAW) was proposed to further enhance the welding productivity by replacing the non-consumable electrode in DE-GMAW with a consumable electrode. The consumable DESA-GMAW system can work stably with appropriate welding parameters. In this paper, the effects of control variables including the voltage of the main power source and slave power source as well as the wire feed speed of the main wire and bypass wire on the current distribution between the workpiece and bypass wire were studied. The effects of the variables on arc behavior and metal transfer process were also studied. The ratio of the current through the bypass wire to the main wire can be increased by decreasing the main power source voltage, increasing the slave power source, or increasing the main wire feed speed. However, a higher ratio obtained by modifying a single control parameter may negatively influence the regular metal transfer process.The ratio of the current through the workpiece to the main filler wire can be most effectively decreased with a combination of relatively lower main power source voltage and higher slave power source voltage.