A Study on the Effect of Aging on Mechanical Properties of Cold-Formed Non-quenched Steel via Nanoindentation
详细信息 查看全文
- 作者：Jinhong Pi ; Yunqiang Bai ; Rui Zhen
- 关键词：aging ; creep ; hardness ; modulus ; nanoindentation ; non ; quenched and tempered steel
- 刊名：Journal of Materials Engineering and Performance
- 出版年：2017
- 出版时间：January 2017
- 年：2017
- 卷：26
- 期：1
- 页码：28-33
- 全文大小：
- 刊物类别：Chemistry and Materials Science
- 刊物主题：Characterization and Evaluation of Materials; Tribology, Corrosion and Coatings; Quality Control, Reliability, Safety and Risk; Engineering Design;
- 出版者：Springer US
- ISSN：1544-1024
- 卷排序：26
文摘
The effect of aging on the nanohardness, modulus and creep properties of non-quenched and tempered steel wire strengthened by cold forming to an area reduction of 37% was investigated by nanoindentation. It was found that aging at 300 °C can improve the nanohardness, modulus, wear resistance and creep resistance of the cold-drawn non-quenched and tempered steel. An aging time longer than 2 h is not necessary since the degree of improvement decreases. The creep procedure of all tested samples includes two distinct stages, the transient creep and steady-state creep. Aging treatment slows down the creep rate at the steady-state stage.