Crossed SMPS MOSFET-based protection circuit for high frequency ultrasound transceivers and transducers

详细信息    查看全文

• 作者：Hojong Choi ; K Kirk Shung
• 关键词：Protection circuit ; SMPS MOSFET ; Ultrasound system ; Ultrasonic transducer
• 刊名：BioMedical Engineering OnLine
• 出版年：2014
• 出版时间：December 2014
• 年：2014
• 卷：13
• 期：1
• 全文大小：648 KB
• 参考文献：1. Shung, KK (2011) Diagnostic ultrasound: Past, present, and future. J Med Biol Eng 31: pp. 371-374 CrossRef
  2. Choi, H, Li, X, Lau, S-T, Hu, C-H, Zhou, Q, Shung, KK (2011) Development of integrated preamplifier for high-frequency ultrasonic transducers and low-power handheld receiver. IEEE Trans Ultrason Ferroelectr Freq Control 58: pp. 2646-2658 CrossRef
  3. Cannata, JM, Williams, JA, Zhou, Q, Ritter, TA, Shung, KK (2006) Development of a 35-MHz piezo-composite ultrasound array for medical imaging. IEEE Trans Ultrason Ferroelectr Freq Control 53: pp. 224-236 CrossRef
  4. Zhu, B, Chan, NY, Dai, J, Shung, KK, Takeuchi, S, Zhou, Q (2013) New fabrication of high-frequency (100-MHz) ultrasound PZT film kerfless linear array. IEEE Trans Ultrason Ferroelect Freq Control 60: pp. 854-857 CrossRef
  5. Qiu, W, Yu, Y, Tsang, FK, Sun, L (2012) A multifunctional, reconfigurable pulse generator for high-frequency ultrasound imaging. IEEE Trans Ultrason Ferroelectr Freq Control 59: pp. 1558-1567 CrossRef
  6. Supertex Inc: / MD0100DB1 High Voltage Protection 8-Channel T/R Switch Demo board. [http://www.supertex.com/pdf/misc/MD0100DB1.pdf]
  7. Choi, H, Shung, KK (2014) Novel power MOSFET-based expander for high frequency ultrasound systems. Ultrasonics 54: pp. 121-130 CrossRef
  8. Szabo, TL (2004) Diagnostic Ultrasound Imaging: Inside Out. Elsevier Academic Press, Boston
  9. International Rectifier: / Application Note AN-937, Gate Drive Characteristics and Requirements for HEXFET Power MOSFETs. [http://www.irf.com/technical-info/appnotes/an-937.pdf]
  10. Blake C, Bull C: / IGBT or MOSFET: Choose Wisely. [http://www.irf.com/technical-info/whitepaper/choosewisely.pdf]
  11. Clemente S, Pelli BR, Isidor A: / Understanding HEXFET Switching Performance. [http://application-notes.digchip.com/014/14-15409.pdf]
  12. Minasian, RA (1983) Power MOSFET dynamic large-signal model. Solid-State and Electron Devices, IEE Proceedings I 130: pp. 73-79 CrossRef
  13. Colotti, J (2005) Analog, RF & EMCconsiderations in printed wiring board design. Proc Long Island Syst Appl and Tech. pp. 16-30
  14. Razavi, B (2003) RF Microelectronics. Pearson Education, Upper Saddle River
  15. Vuolevi, J, Rahkonen, T (2003) Distortion in RF Power Amplifiers. Artech House, Norwood
  16. Cripps, SC (2002) Advanced Techiques in RF Power Amplifier Design. Artech House, Norwood
  17. Friis, HT (1944) Noise figures of radio receivers. Pro of the IRE 32: pp. 419-422 CrossRef
  18. Maxim Integrated Products Inc: / Three Methods of Noise Figure Measurement. [http://www.maximintegrated.com/en/app-notes/index.mvp/id/2875]
  
• 刊物类别：Engineering
• 出版者：BioMed Central
• ISSN：1475-925X

文摘

Background The ultrasonic transducer is one of the core components of ultrasound systems, and the transducer’s sensitivity is significantly related the loss of electronic components such as the transmitter, receiver, and protection circuit. In an ultrasonic device, protection circuits are commonly used to isolate the electrical noise between an ultrasound transmitter and transducer and to minimize unwanted discharged pulses in order to protect the ultrasound receiver. However, the performance of the protection circuit and transceiver obviously degrade as the operating frequency or voltage increases. We therefore developed a crossed SMPS (Switching Mode Power Supply) MOSFET-based protection circuit in order to maximize the sensitivity of high frequency transducers in ultrasound systems. The high frequency pulse signals need to trigger the transducer, and high frequency pulse signals must be received by the transducer. We therefore selected the SMPS MOSFET, which is the main component of the protection circuit, to minimize the loss in high frequency operation. The crossed configuration of the protection circuit can drive balanced bipolar high voltage signals from the pulser and transfer the balanced low voltage echo signals from the transducer. Methods The equivalent circuit models of the SMPS MOSFET-based protection circuit are shown in order to select the proper device components. The schematic diagram and operation mechanism of the protection circuit is provided to show how the protection circuit is constructed. The P-Spice circuit simulation was also performed in order to estimate the performance of the crossed MOSFET-based protection circuit. Results We compared the performance of our crossed SMPS MOSFET-based protection circuit with a commercial diode-based protection circuit. At 60?MHz, our expander and limiter circuits have lower insertion loss than the commercial diode-based circuits. The pulse-echo test is typical method to evaluate the sensitivity of ultrasonic transducers. Therefore, we performed a pulse-echo test using a single element transducer in order to utilize the crossed SMPS MOSFET-based protection circuit in an ultrasound system. Conclusions The SMPS-based protection circuit could be a viable alternative that provides better sensitivity, especially for high frequency ultrasound applications.