Preliminary study for online monitoring during the punching process
详细信息 查看全文
- 作者：Delima Yanti Sari ; Tsung-Liang Wu…
- 关键词：Tool online monitoring ; Vibration signal ; Punching process ; Tool wear ; Burr height
- 刊名：The International Journal of Advanced Manufacturing Technology
- 出版年：2017
- 出版时间：February 2017
- 年：2017
- 卷：88
- 期：5-8
- 页码：2275-2285
- 全文大小：
- 刊物类别：Engineering
- 刊物主题：Industrial and Production Engineering; Media Management; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design;
- 出版者：Springer London
- ISSN：1433-3015
- 卷排序：88
文摘
Monitoring of the punching operation plays an important role in enhancing product quality and tooling protection. In sheet metal working, most monitoring methods use tonnage/cutting force signal. In this study, the potential of vibration signal in the frequency range from 0 to 1000 Hz for punching monitoring is reported. The experiment is conducted by using a punch with a diameter of 0.8 mm and a speed of 50 rpm. The sheet material is SUS304 with a thickness of 0.5 mm. During the experiments, the signals, the tool conditions, and the burr formation are observed. The results show that there is a correlation between tool conditions with vibration signal. The influence of tool wear, an indication of punch breakage, and an incident of punch breakage are prominent. By the development of wear, the burr height increases and an increase in vibration amplitude is observed. When the burr height grows up to 3.5 times, certain vibrational peak amplitude increases around 15 times. This will be remarkable results for online monitoring because the off-line measurement of burr height can be substituted by vibration measurement. Based on these results, it can be concluded that the vibration signals at this frequency range have the potential for monitoring the tool condition and burr formation in the punching process.