New colloidal fabrication of bioceramics with controlled porosity for delivery of antibiotics

详细信息    查看全文

• 作者：Lydie Ploux ; Mihaela Mateescu ; Lise Guichaoua…
• 刊名：Journal of Materials Science
• 出版年：2016
• 出版时间：October 2016
• 年：2016
• 卷：51
• 期：19
• 页码：8861-8879
• 全文大小：2,995 KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Materials Science
  Characterization and Evaluation Materials
  Polymer Sciences
  Continuum Mechanics and Mechanics of Materials
  Crystallography
  Mechanics
  
• 出版者：Springer Netherlands
• ISSN：1573-4803
• 卷排序：51

文摘

Bone tissue regeneration with bioceramics-based biomaterial can suffer from associated bone infections. The objective of this study was to develop new antibiotics drug delivery systems, composed of ceramics matrix with a controlled porosity aiming at releasing the antibiotics loaded in the matrix, in the bone implantation site and in a controlled way. Synthesis of the ceramics matrix is based on a colloidal approach. First, the heterocoagulation of hydroxyapatite nanoparticles (HA) and polymethylmethacrylate microspheres (PMMA) provides the control of the porosity in HA matrix. With constant size of microspheres and HA/PMMA ratio, the sintering temperature allows the modulation of interconnections porosity and volume. In this study, two sintering temperatures, resulting in two different porosities, are used. Secondly, porous biomaterials are loaded with tetracycline hydrochloride (antibiotics with large spectrum used in treatment of bone infections) by impregnation under vacuum. Control of the porous microstructure allows variation of the loaded quantity of antibiotics and of their release kinetics. The antibacterial properties of the ceramics loaded with antibiotics vary with the porous microstructure, both in terms of bacterial growth in the ceramic surroundings and of bacterial colonization of the ceramic surface. Protein adsorption from surroundings onto the ceramic surface varies depending on the porous structure, however without inducing significant changes of antibacterial properties. Unloaded and loaded porous bioceramics are biocompatible with pre-osteoblastic cells as shown by in vitro evaluation. The investigation of DDS with two different porosities demonstrated the possibility to control the antibiotics loaded quantity and the antibacterial efficiency by varying the matrix porosity. Release kinetics is also affected by changes in ceramic porosity but in a much more limited way.Roxana Chotard-Ghodsnia—In memoriam.Electronic supplementary materialThe online version of this article (doi:10.1007/s10853-016-0133-z) contains supplementary material, which is available to authorized users.