文摘
Porous solid polymer electrolytes (SPE) were prepared in the form of thin films by phase inversion by direct immersion in non-solvent acetone or methanol, using a copolymer of polyacrylonitrile and poly (vinyl acetate) in ethylene carbonate/dimethylene carbonate (EC/DMC 1:1 v/v) as plasticizer, which contained different LiClO4 percentages. SEM images revealed pores on a micrometer scale (average diameter around 2?μm) distributed inside and on the surface of the films. XRD patterns revealed a predominantly amorphous behavior, favorable to the ionic conduction process. Thin films presented low glass transition temperatures (T g), between ?7 and ?8?°C. Thin films showed a thermal stability higher than those obtained for the gels. Thin films (average thickness of 22?μm) showed ionic conductivity around 10?0 S cm? and 10? S cm? by immersion in acetone and methanol, respectively. The porous thin films when were swollen in liquid electrolyte, the maximum ionic conductivity value reached was of 2.5?×?10? S cm? with 10?% LiClO4 at 25?°C. The oxidation of the SPE only occurred around 4.5?V for the gel and 4.8?V versus Li/Li+ for the SPE thin film, thus resulting in a wide electrochemical stability. A stable passive layer at the interface between the polymer electrolyte and lithium metal was formed within the first 10?h and maintained during 4?weeks. The cell containing LiCoO2 in thin-film electrolyte presented the one well-known plateaux for the Li-ion intercalation in the 4?V region.