Small amplitude reciprocating wear performance of diamond-like carbon films: dependence of film composition and counterface material

详细信息    查看全文

• 作者：Jason A. Bares ; Anirudha V. Sumant ; David S. Grierson ; Robert W. Carpick and Kumar Sridharan
• 关键词：small amplitude reciprocating wear ; diamond ; like carbon films ; plasma ; friction
• 刊名：Tribology Letters
• 出版年：2007
• 出版时间：July, 2007
• 年：2007
• 卷：27
• 期：1
• 页码：79-88
• 全文大小：528 KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Tribology, Corrosion and Coatings
  Surfaces and Interfaces and Thin Films
  Theoretical and Applied Mechanics
  Physical Chemistry
  Nanotechnology
  
• 出版者：Springer Netherlands
• ISSN：1573-2711

文摘

Small amplitude (50 μm) reciprocating wear of hydrogen-containing diamond-like carbon (DLC) films of different compositions has been examined against silicon nitride and polymethyl-methacrylate (PMMA) counter-surfaces, and compared with the performance of an uncoated steel substrate. Three films were studied: a DLC film of conventional composition, a fluorine-containing DLC film (F-DLC), and silicon-containing DLC film. The films were deposited on steel substrates from plasmas of organic precursor gases using the Plasma Immersion Ion Implantation and Deposition (PIIID) process, which allows for the non-line-of-sight deposition of films with tailored compositions. The amplitude of the resistive frictional force during the reciprocating wear experiments was monitored in situ, and the magnitude of film damage due to wear was evaluated using optical microscopy, optical profilometry, and atomic force microscopy. Wear debris was analyzed using scanning electron microscopy and energy dispersive spectroscopy. In terms of friction, the DLC and silicon-containing DLC films performed exceptionally well, showing friction coefficients less than 0.1 for both PMMA and silicon nitride counter-surfaces. DLC and silicon-containing DLC films also showed significant reductions in transfer of PMMA compared with the uncoated steel. The softer F-DLC film performed similarly well against PMMA, but against silicon nitride, friction displayed nearly periodic variations indicative of cyclic adhesion and release of worn film material during the wear process. The results demonstrate that the PIIID films achieve the well-known advantageous performance of other DLC films, and furthermore that the film performance can be significantly affected by the addition of dopants. In addition to the well-established reduction of friction and wear that DLC films generally provide, we show here that another property, low adhesiveness with PMMA, is another significant benefit in the use of DLC films.