Development of Microstructure and Crystallographic Texture in a Double-Sided Friction Stir Welded Microalloyed Steel

详细信息    查看全文

• 作者：S. Rahimi ; B. P. Wynne ; T. N. Baker
• 刊名：Metallurgical and Materials Transactions A
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：48
• 期：1
• 页码：362-378
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Metallic Materials; Characterization and Evaluation of Materials; Structural Materials; Surfaces and Interfaces, Thin Films; Nanotechnology;
• 出版者：Springer US
• ISSN：1543-1940
• 卷排序：48

文摘

The evolution of microstructure and crystallographic texture has been investigated in double-sided friction stir welded microalloyed steel, using electron backscatter diffraction (EBSD). The microstructure analyses show that the center of stirred zone reached a temperature between Ac₁ and Ac₃ during FSW, resulting in a dual-phase austenitic/ ferritic microstructure. The temperatures in the thermo-mechanically affected zone and the overlapped area between the first and second weld pass did not exceed the Ac₁. The shear generated by the rotation probe occurs in austenitic/ferritic phase field where the austenite portion of the microstructure is transformed to a bainitic ferrite, on cooling. Analysis of crystallographic textures with regard to shear flow lines generated by the probe tool shows the dominance of simple shear components across the whole weld. The austenite texture at Ac₁ - Ac₃ is dominated by the B\( \left\{ {1\bar{1}2} \right\}\langle 110\rangle \) and \( \bar{B} \)\( \left\{ {\bar{1}1\bar{2}} \right\}\langle \bar{1}\bar{1}0\rangle \) simple shear texture components, where the bainite phase textures formed on cooling were inherited from the shear textures of the austenite phase with relatively strong variant selection. The ferrite portion of the stirred zone and the ferrites in the thermo-mechanically affected zones and the overlapped area underwent shear deformation with textures dominated by the D₁\( \left\{ {\bar{1}\bar{1}2} \right\}\langle 111\rangle \) and D₂\( \left\{ {11\bar{2}} \right\}\langle 111\rangle \) simple shear texture components. The formation of ultrafine equiaxed ferrite with submicron grain size has been observed in the overlapped area between the first and second weld pass. This is due to continuous dynamic strain-induced recrystallization as a result of simultaneous severe shear deformation and drastic undercooling.