Determination of zero difference GPS differential code biases for satellites and prominent receiver types

详细信息    查看全文

• 作者：A. A. Sedeek ; M. I. Doma ; M. Rabah ; M. A. Hamama
• 关键词：GPS ; Differential code biases DCBs ; Total electron content ; Zero difference GPS receiver ; IGS
• 刊名：Arabian Journal of Geosciences
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：10
• 期：3
• 全文大小：
• 刊物类别：Earth and Environmental Science
• 刊物主题：Earth Sciences, general;
• 出版者：Springer Berlin Heidelberg
• ISSN：1866-7538
• 卷排序：10

文摘

The differential code bias (DCB) is the differential hardware (e.g., the satellite or receiver) delay that occurs between two different observations obtained at the same or two different frequencies. There are two approaches used to estimate DCBs for receivers and satellites: the relative and absolute methods. The relative method utilizes a GPS network, while the absolute method determines DCBs from a single station (zero difference). Three receiver types based on the pseudo-range observables were used here to collect the GPS data: Codeless Tracking, Cross Correlation, and Non-Cross Correlation styles. According to its types, GPS receivers have responded to restrictions on the GPS signal structure in different ways. The main goal of the current research is providing a method to determine the DCBs of GPS satellites and dual frequency receivers. The developed mathematical model was based on spherical harmonic function and geometry-free combination of pseudo-range observables (C/A or/and P-code) according to receiver type. A new elevation-dependent weighting function with respect to GPS satellites in our algorithm was applied. The applied weighting function was used to consider the quality variation of satellite DCBs, which is caused by pseudo-range measurement errors. The code of the proposed mathematical model was written using MATLAB and is called “zero difference differential code bias estimation (ZDDCBE)”. This code was tested and evaluated using data from IGS GNSS stations and different types of GPS stations out of IGS network installed in Egypt and Saudi Arabia. The estimated values from the ZDDCBE code show a good agreement with the IGS analysis centers with a mean error of estimation for the receiver DCB equal 5.94%. Therefore, the ZDDCBE code can be used to estimate the DCB for any type of receiver regardless if the receiver is from IGS network or not.