参考文献:1. B.S. Murty and S. Ranganathan: / Int. Mater. Rev., 1998, vol. 43, pp. 101鈥?1. CrossRef 2. C.C. Koch: / Mater. Sci. Eng. A, 1998, vol. 244, pp. 39鈥?8. CrossRef 3. S.K. Pabi, D. Das, T.K. Mahapatra, and I. Manna: / Acta Mater., 1998, vol. 46, pp. 3501鈥?0. CrossRef 4. D. Das, P.P. Chatterjee, I. Manna, and S.K. Pabi: / Scripta Mater., 1999, vol. 41, pp. 861鈥?6. CrossRef 5. D.B. Witkin and E.J. Lavernia: / Prog. Mater. Sci., 2006, vol. 51, pp. 1鈥?0. CrossRef 6. F.A. Mohamed: / Acta Mater., 2003, vol. 51, pp. 4107鈥?9. CrossRef 7. C.C. Koch: / Nanostruct. Mater., 1993, vol. 2, pp. 109鈥?9. CrossRef 8. A. Verma, K. Biswas, C.S. Tiwary, A. Mondal, and K. Chattopadhyay: / Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1127鈥?7. CrossRef 9. C.S. Tiwary, A. Verma, K. Biswas, A. Mondal, and K. Chattopadhyay: / Ceram. Int., 2011, vol. 37, pp. 3677鈥?6. CrossRef 10. K. Barai, C.S. Tiwary, P.P. Chattopadhyay, and K. Chattopadhyay: / Mater. Sci. Eng. A, 2012, vol. 558, pp. 52鈥?8. CrossRef 11. X. Zhang, H. Wang, J. Narayan, and C.C. Koch: / Acta Mater., 2001, vol. 49, pp. 1319鈥?6. CrossRef 12. X. Zhang, H. Wang, M. Kassem, J. Narayan, and C.C. Koch: / Scripta Mater., 2002, vol. 46, pp. 661鈥?5. CrossRef 13. I. Manna, P.P. Chattopadhyay, F. Banhart, and H.-J. Fecht: / Appl. Phys. Lett., 2002, vol. 81, pp. 4136鈥?8. CrossRef 14. I. Manna, P.P. Chattopadhyay, P. Nandi, F. Banhart, and H.-J. Fecht: / J. Appl. Phys., 2003, vol. 93, pp. 1520鈥?2. CrossRef 15. G.K. Williamson and W.H. Hall: / Acta Metall., 1953, vol. 1, pp. 22鈥?1. CrossRef 16. M. Dao, L. Lu, Y.F. Shen, and S. Suresh: / Acta Mater., 2006, vol. 54, pp. 5421鈥?2. CrossRef 17. H.J. Fecht: / Nanostruct. Mater., 1995, vol. 6, pp. 33鈥?2. CrossRef 18. B. Han, J. Ye, F. Tang, J. Shoenung, and E.J. Lavernia: / J. Mater. Sci., 2007, vol. 42, pp. 1660鈥?2. CrossRef 19. F. Sun, P. Rojas, A. Z煤帽iga, and E.J. Lavernia: / Mater. Sci. Eng. A, 2006, vol. 430, pp. 90鈥?7. CrossRef 20. M.I. Alymov, E.I. Maltina, and Y.N. Stepanov: / Nanostruct. Mater., 1994, vol. 4, pp. 737鈥?2. CrossRef 21. G. Guisbiers and S. Pereira: / Nanotechnology, 2007, vol. 18, pp. 435710-1鈥?35710-7. CrossRef 22. C. Flake and C. Campbell: / Elements of Metallurgy and Engineering Alloys, ASM International, Materials Park, OH, 2008. 23. J.C. Billelo, D. Dew-Hughes, and A.T. Pucino: / J. Appl. Phys., 1983, vol. 54, pp. 821鈥?6. CrossRef 24. N. Hashimoto, H. Yoden, and S. Deki: / J. Am. Ceram. Soc., 1993, vol. 76, pp. 438鈥?2. CrossRef 25. R.B. Schwarz and C.C. Koch: / Appl. Phys. Lett., 1986, vol. 49, pp. 146鈥?8. CrossRef 26. / Smithells Metal Reference Handbook, 7th ed., E.A. Brandes and G.B. Brook, eds., Butterworth-Heinemann, Burlington, MA, 1992.
1. Department of Materials Engineering, Indian Institute of Science, Bangalore, 560012, Karnataka, India 2. Department of Materials Science and Engineering, Indian Institute of Technology Kanpur, Kanpur, 208016, Uttar Pradesh, India
ISSN:1543-1940
文摘
The present investigation reports the preparation of freestanding nanocrystalline Zn by combined mechanical milling at cryogenic and room temperatures. The cryomilling is used as an effective means of rapid fracturing. The detailed scanning electron microscopy and transmission electron microscopy observations indicate that the minimum crystallite size is 6聽卤聽2聽nm after 3聽hours of cryomilling. The crystallite size increases to 30聽卤聽2聽nm after 3聽hours of room temperature milling of the cryomilled powder due to deformation-induced sintering. Detailed theoretical analysis allows us to obtain a diagram of size of the nanoparticles formed vs temperature to explain the experimental findings.