Investigations on the Nature of Ceramic Deposits in Plasma Spray–Physical Vapor Deposition

详细信息    查看全文

• 作者：W. He ; G. Mauer ; M. Gindrat ; R. Wäger ; R. Vaßen
• 关键词：CFD modeling ; columnar ; structured TBCs ; deposition model ; PS ; PVD
• 刊名：Journal of Thermal Spray Technology
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：26
• 期：1-2
• 页码：83-92
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Surfaces and Interfaces, Thin Films; Tribology, Corrosion and Coatings; Characterization and Evaluation of Materials; Operating Procedures, Materials Treatment; Analytical Chemistry;
• 出版者：Springer US
• ISSN：1544-1016
• 卷排序：26

文摘

In Plasma Spray–Physical Vapor Deposition (PS-PVD) process, major fractions of the feedstock powder can be evaporated so that coatings are deposited mainly from the vapor phase. In this work, Computational Fluid Dynamics (CFD) results indicate that such evaporation occurs significantly in the plasma torch nozzle and even nucleation and condensation of zirconia is highly possible there. Experimental work has been performed to investigate the nature of the deposits in the PS-PVD process, in particular coatings from condensate vapor and nano-sized clusters produced at two spraying distances of 1000 mm and 400 mm. At long spraying distance, columns in the coatings have pyramidal tops and very sharp faceted microstructures. When the spraying distance is reduced to 400 mm, the tops of columns become relatively flat and a faceted structure is not recognizable. XRD patterns show obvious preferred orientations of (110) and (002) in the coatings sprayed at 400 mm but only limited texture in the coatings sprayed at 1000 mm. Meanwhile, a non-line of sight coating was also investigated, which gives an example for pure vapor deposition. Based on these analyses, a vapor and cluster depositions are suggested to further explain the formation mechanisms of high-quality columnar-structured PS-PVD thermal barrier coatings which have already shown excellent performance in cyclic lifetime test.