On technical requirements for Arc Suppression Reactors in the distribution circuit of 6–35 kV

详细信息    查看全文

• 作者：D. A. Matveev ; A. M. Bykova ; A. V. Zhuikov ; V. S. Larin…
• 关键词：single ; phase earth faults ; compensation of capacitive currents ; arc suppression reactors
• 刊名：Russian Electrical Engineering
• 出版年：2016
• 出版时间：August 2016
• 年：2016
• 卷：87
• 期：8
• 页码：425-430
• 全文大小：306 KB
• 刊物类别：Engineering
• 刊物主题：Manufacturing, Machines and Tools
  Russian Library of Science
  
• 出版者：Allerton Press, Inc. distributed exclusively by Springer Science+Business Media LLC
• ISSN：1934-8010
• 卷排序：87

文摘

Development of the technical requirements for arc suppression reactors (ASRs) used for the capacitive current compensation of the single-phase earth fault is a critical task. The corresponding GOST (State Standard) 19470–74 “Oil-Filled Arc Suppression Reactors. Technical Requirements” is no more valid; automatically controlled reactors (with adjustable spacing controlled by magnetic biasing) are the mainstream; and completely new reactor designs, with the capacitor adjustment in particular, have become available. The standard guide for the earth-fault current compensation [1], not taking into account new technologies, has become obsolete. This paper considers the current criteria for the ASR application in the 6- to 35-kV networks and proposes new ones. It is proposed to use the residual earth-fault current, but not the ASR detuning coefficient, as the major criterion for capacitive current compensation of the single-phase earth fault; in this case, new requirements for the ASR and the network conditions characterized by active phase-to-ground and harmonics content currents are specified taking into account the electrical safety regulations. The problem of capacitance asymmetry is considered absolutely and relatively, and it is shown that the use of ASRs controlled by magnetic biasing allows omitting the network balancing and limitation of the asymmetry voltage at the level of 0.75% of the phase voltage. It is proposed to take into account these recommendations during development of an earth-fault current compensation guide and general technical requirements for ASRs and automatic tuning systems.