Bone and Skin-Supported Stereolithographic Surgical Guides for Cranio-Facial Implant Placement

详细信息    查看全文

• 作者：Hamit Serdar Çötert ; Mustafa Yılmaz
• 关键词：Facial Prosthesis ; Craniofacial Implant ; Surgical Guide ; Virtual Planning ; Stereolithography
• 刊名：Journal of Maxillofacial and Oral Surgery
• 出版年：2016
• 出版时间：March 2016
• 年：2016
• 卷：15
• 期：1
• 页码：76-81
• 全文大小：1,585 KB
• 参考文献：1.Federspil PA (2009) Implant-retained craniofacial prostheses for facial defects. Laringorhinootologie 88(Suppl 1):125–138CrossRef
  2.Gentile P, Bottini DJ, Colicchia GM, Trimarco A, Cervelli V (2008) Burns: bone-anchored, extra-oral implantology. J Burn Care Res 29:627–631CrossRef PubMed
  3.Nanda A, Jain V, Kumar R, Kabra K (2011) Implant supported auricular prosthesis. Indian J Dent Res 22:152–156CrossRef PubMed
  4.Somers T, De Cubber J, Govaerts P, Offeciers FE (1998) Total auricular repair: bone anchored prosthesis or plastic reconstruction? Acta Otorhinolaryngol Belg 52:317–327PubMed
  5.Pravinkumar G, Patil MDS (2010) Modified technique to fabricate a hollow light-weight facial prosthesis for lateral midfacial defect: a clinical report. J Adv Prosthodont 2:65–70CrossRef
  6.Padmanabhan TV, Mohamed K, Parameswari D, Nitin SK (2012) Prosthetic rehabilitation of an orbital and facial defect: a clinical report. J Prosthodont 21:200–204CrossRef PubMed
  7.Nagaraj E, Shetty M, Krishna PD (2011) Definitive magnetic nasal prosthesis for partial nasal defect. Indian J Dent Res 22:597–599CrossRef PubMed
  8.Shaikh SR, Patil PG, Puri S (2011) A modified technique for retention of orbital prosthesis. Indian J Dent Res 22:863–865CrossRef PubMed
  9.Jain S, Maru K, Shukla J, Vyas A, Pillai R, Jain P (2011) Nasal prosthesis rehabilitation: a case report. J Indian Prosthodont Soc 11:265–269PubMedCentral CrossRef PubMed
  10.Ciocca L, Maremonti P, Bianchi B, Scotti R (2007) Maxillofacial rehabilitation after rhinectomy using two different treatment options: clinical reports. J Oral Rehabil 34:311–315CrossRef PubMed
  11.Ciocca L, Fantini M, De Crescenzio F, Persiani F, Scotti R (2010) New protocol for construction of eyeglasses supported provisional nasal prosthesis using CAD/CAM techniques. J Rehabil Res Dev 47:595–604CrossRef PubMed
  12.Hatamleh MM, Haylock C, Watson J, Watts DC (2010) Maxillofacial prosthetic rehabilitation in the UK: a survey of maxillofacial prosthetists’ and technologists’ attitudes and opinions. Int J Oral Maxillofac Surg 39:1186–1192CrossRef PubMed
  13.Kiat-amnuay S, Waters PJ, Roberts D, Gettleman L (2008) Adhesive retention of silicone and chlorinated polyethylene for maxillofacial prostheses. J Prosthet Dent 99:483–488CrossRef PubMed
  14.Hecker DM (2003) Maxillofacial rehabilitation of a large facial defect resulting from an arteriovenous malformation utilizing a two-piece prosthesis. J Prosthet Dent 89:109–113CrossRef PubMed
  15.Akman S, Kalayci A, Ataoğlu H, Aykent F (2011) Complex midfacial reconstruction with an implant-supported framework. J Craniofac Surg 22:724–726CrossRef PubMed
  16.Leonardi A, Buonaccorsi S, Pellacchia V, Moricca LM, Indrizzi E, Fini G (2008) Maxillofacial prosthetic rehabilitation using extraoral implants. J Craniofac Surg 19:398–405CrossRef PubMed
  17.Karakoca S, Aydin C, Yilmaz H, Bal BT (2010) Retrospective study of treatment outcomes with implant-retained extraoral prostheses: survival rates and prosthetic complications. J Prosthet Dent 103:118–126CrossRef PubMed
  18.Federspil PA (2010) Auricular prostheses. Adv Otorhinolaryngol 68:65–80PubMed
  19.Mello MC, Piras JA, Takimoto RM, Cervantes O, Abraão M, Dib LL (2012) Facial reconstruction with a bone-anchored prosthesis following destructive cancer surgery. Oncol Lett 4:682–684PubMedCentral PubMed
  20.Postema N, van Waas MA, van Lokven J (1994) Procedure for fabrication of an implant-supported auricular prosthesis. J Invest Surg 7:305–320CrossRef PubMed
  21.Charpiot A, Chambres O, Herve JF, Million P, Riedinger AM, Hemar P (2006) Osteointegrated cranio-facial implants: 49 patients report. Rev Laryngol Otol Rhinol 127:217–222
  22.Konstantinović VS, Lazić VM, Stefan I (2010) Nasal epithesis retained by basal (disk) implants. J Craniofac Surg 21:33–36CrossRef PubMed
  23.Toljanic JA, Eckert SE, Roumanas E, Beumer J, Huryn JM, Zlotolow IM, Reisberg DJ, Habakuk SW, Wriht RF, Rubenstein JE, Schneid TR, Mulasseril P, Garcia LT, Bedard JF, Choi YG (2005) Osseointegrated craniofacial implants in the rehabilitation of orbital defects: an update of a retrospective experience in the United States. J Prosthet Dent 94:177–182CrossRef PubMed
  24.Gurbuz A, Kalkan M, Ozturk AN, Eskitascioglu G (2004) Nasal prosthesis rehabilitation: a case report. Quintessence Int 35:655–656PubMed
  25.Guttal SS, Patil NP, Thakur S, Kumar S, Kulkarni SS (2009) Implant-retained nasal prosthesis for a patient following partial rhinectomy: a clinical report. J Prosthodont 18:353–358CrossRef PubMed
  26.Kurtulmus H, Cotert HS, Guneri P (2009) CT-based planning and 3-D modeling for craniofacial implant placement: a technical note. Int J Oral Maxillofac Implants 24:943–946PubMed
  27.Federspil PA (2010) Craniofacial prostheses for facial defects. HNO 58:621–631CrossRef PubMed
  28.Klein M, Hein A, Lueth T, Bier J (2003) Robot-assisted placement of craniofacial implants. Int J Oral Maxillofac Implants 18:712–718PubMed
  29.Cheng AC, Morrison D, Cho RS, Archibald D (1998) Vacuum-formed matrix as a guide for the fabrication of craniofacial implant tissue bar-retained auricular prostheses. J Prosthet Dent 79:711–714CrossRef PubMed
  30.Coward TJ, Watson RM, Wilkinson IC (1999) Fabrication of a wax ear by rapid-process modeling using stereolithography. Int J Prosthodont 12:20–27PubMed
  31.Germec-Cakan D, Canter HI, Nur B, Arun T (2010) Comparison of facial soft tissue measurements on three-dimensional images and models obtained with different methods. J Craniofac Surg 21:1393–1399CrossRef PubMed
  32.Cheah CM, Chua CK, Tan KH (2003) Integration of lazer surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 2: development of molding techniques for casting prosthetic parts. Int J Prosthodont 16:543–548PubMed
  33.Kling-Petersen T, Rydmark M (2000) Modeling and modification of medical 3D objects. The benefit of using a haptic modeling tool. Stud Health Technol Inform 70:162–167PubMed
  34.Norton MR, Gamble C (2001) Bone classification: an objective scale of bone density using the computerized tomography scan. Clin Oral Implants Res 12:79–84CrossRef PubMed
  35.Reitemeier B, Notni G, Heinze M, Schöne C, Schmidt A, Fichtner D (2004) Optical modeling of extraoral defects. J Prosthet Dent 91:80–84CrossRef PubMed
  36.Alfano SG, Robinson RF, Webber CM, Erickson KK (2005) Fabrication of a craniofacial implant: surgical and treatment planning guide. J Prosthet Dent 93:91–94CrossRef PubMed
  37.Verdonck HWD, Poukens J, Overveld HV, Riediger D (2003) Computer assisted maxillofacial prosthodontics: a new treatment protocol. Int J Prosthodont 16:326–328PubMed
  38.Girod S, Keeve E, Girod B (1995) Advances in interactive craniofacial surgery planning by 3D simulation and visualization. Int J Oral Maxillofac Surg 24:120–125CrossRef PubMed
  
• 作者单位：Hamit Serdar Çötert (1)
  Mustafa Yılmaz (2)
  
  1. Department of Prosthodontics, Faculty of Dentistry, Ege University, 35100, Bornova, Izmir, Turkey
  2. Department of Plastic and Reconstructive Surgery, Faculty of Medicine, Dokuz Eylül University, 35330, İnciraltı, Izmir, Turkey
  
• 刊物主题：Oral and Maxillofacial Surgery; Dentistry; Otorhinolaryngology; Plastic Surgery;
• 出版者：Springer India
• ISSN：0974-942X

文摘

Purpose Osseointegrated skin-penetrating implants enhance the retention and stability of the craniofacial prostheses and provide the long-term comfort. However, to determine the implant locations is a great challenge facing the surgeon. Implants may either be located in conventional manner or by STL generated surgical guides.