Comparative study of microstructure and texture of cast and homogenized TX32 magnesium alloy after hot deformation

详细信息    查看全文

• 作者：C. Dharmendra ; K. P. Rao ; Y. V. R. K. Prasad ; N. Hort…
• 关键词：alloys ; Homogenization ; Hot working ; Microstructure ; Texture
• 刊名：Metals and Materials International
• 出版年：2015
• 出版时间：January 2015
• 年：2015
• 卷：21
• 期：1
• 页码：134-146
• 全文大小：1,850 KB
• 参考文献：1. M. Avedesian and M. Baker, / ASM Speciality Handbook: Magnesium and Magnesium Alloys, pp.78-4, ASM Interational, Materials Park, OH (1999).
  2. K. U. Kainer, / Magnesium Alloys and Technologies (ed. K.U. Kainer), pp.1-2, WILEY-VCH Verlang GmbH & Co. KG aA, Weinheim (2003).
  3. C. C. Huang, J. C. Huang, Y. K. Lin, and Y. M. Hwang, / Mater. Trans. Japan Inst. Metals. 45, 3142 (2004).
  4. J. H. Park, H. L. Kim, J. E. Jung, and Y. W. Chang, / Met. Mater. Int. 19, 389 (2013). CrossRef
  5. S. B. Yi, S. Zaefferer, and H. G. Brokmeier, / Mater. Sci. Eng. A 424, 275 (2006). CrossRef
  6. Y. V. R. K. Prasad and K. P. Rao, / Adv. Eng. Mater. 9, 558 (2007). CrossRef
  7. Y. V. R. K. Prasad and K. P. Rao, / Mater. Sci. Eng. A 487, 316 (2008). CrossRef
  8. Y. M. Kim, C. D. Yim, and B. S. You, / Met. Mater. Int. 17, 583 (2011). CrossRef
  9. N. Hort, D. Y. Huang, T. A. Leil, P. Naiev, and K. U. Kainer, / Adv. Eng. Mater. 8, 359 (2006). CrossRef
  10. D. H. Kang, S. S. Park, and N. J. Kim, / Mater. Sci. Eng. A 413-14, 555 (2005). CrossRef
  11. C. L. Mendis, C. J. Bettles, A. M. Gibson, and C. R. Hutchinson, / Mater. Sci. Eng. A 435-36, 163 (2006). CrossRef
  12. Y. V. R. K. Prasad and K. P. Rao, / Mater. Des. 30, 3723 (2009). CrossRef
  13. B. H. Lee, S. M. Kim, M. E. Mehtedi, E. Evangelista, and C. S. Lee, / Met. Mater. Int. 16, 197 (2010). CrossRef
  14. W. Hosford, / The Mechanics of Crystals and Textured Polycrystals, pp124-28, Oxford University Press, New York (1993).
  15. H. L. Kim and Y. W. Chang, / Met. Mater. Int. 17, 563 (2011). CrossRef
  16. L. L. Chang, Y. N. Wang, X. Zhao, and M. Qi, / Mater Charact. 60, 991 (2009). CrossRef
  17. B. Shin, H. Kang, and D. Bae, / Met. Mater. Int. 18, 23 (2012). CrossRef
  18. J. J. Jonas, C. M. Sellars, and W. J. McG Tegart, / Metall. Rev. 43, 243 (1998). CrossRef
  19. Y. V. R. K. Prasad and S. Sasidhara, / Hot Working Guide: A Compendium of Processing maps, ASM international, Materials park, OH (1997).
  20. Y. V. R. K. Prasad and T. Seshacharyulu, / Int. Mater. Rev. 43, 243 (1998). CrossRef
  21. H. Ziegler, In: Sneddon, I. N., Hill. R., (Eds.), / Progress in Solid Mechanics, Wiley, New York, 4, 91 (1965).
  22. T. Abu Leil,_N. Hort, H. Dieringa, C. Blawert, Y. Huang, K. U. Kainer, and K. P. Rao, / Proc. of the int. Symp. on Magnesium Technology in the Global Age (eds. M. O. Pekguleryuz and L. W. F. Mackenzie), pp.739-49, Met. Soc. CIM, Montreal (2006).
  23. K. P. Rao, Y. V. R
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Metallic Materials
  Operating Procedures and Materials Treatment
  
• 出版者：The Korean Institute of Metals and Materials, co-published with Springer Netherlands
• ISSN：2005-4149

文摘

The effect of homogenization on the hot deformation behavior and texture evolution of Mg-3Sn-2Ca (TX32) alloy is investigated. The cast-homogenized alloy samples were hot compressed in the temperature and strain rate ranges of 300-00 °C and 0.0003-0 s?, respectively, and a processing map has been developed by using the flow stress data. The map revealed two dynamic recrystallization (DRX) domains with a peak efficiency of 44% at 360 °C/0.0003 s? (Domain 1) and 43% at 485 °C/0.1 s? (Domain 2). When compared with the map for as-cast condition, it is observed that both the domains moved towards higher temperatures although the shift of Domain 1 is more noticeable. The apparent activation energy values in the two domains and the regime of flow instability are nearly unchanged by homogenization, suggesting that Mg2Ca and CaMgSn particles in the microstructure are thermally stable. Specimens deformed under conditions in Domain 1 have high Schmid factors for {0001} \(\left\langle {11\bar 20} \right\rangle\) basal slip and \(\left\{ {1\bar 100} \right\}\) \(\left\langle {11\bar 20} \right\rangle\) prismatic slip, while in Domain 2 the deformation progressed due to \(\left\{ {11\bar 2 \bar 2} \right\}\) \(\left\langle {11\bar 2 \bar 3} \right\rangle\) second-order pyramidal slip.