Electroless Pd deposition on a planar porous stainless steel substrate using newly developed plating rig and agitating water bath
详细信息 查看全文
- 作者：Beom-Seok Seo ; Jae-Yun Han ; Kwan-Young Lee…
- 关键词：Pd Membrane ; Hydrogen ; Electroless Plating ; Porous Stainless Steel ; External Mass Transfer
- 刊名：Korean Journal of Chemical Engineering
- 出版年：2017
- 出版时间：January 2017
- 年：2017
- 卷：34
- 期：1
- 页码：266-272
- 全文大小：
- 刊物类别：Chemistry and Materials Science
- 刊物主题：Industrial Chemistry/Chemical Engineering; Catalysis; Materials Science, general; Biotechnology;
- 出版者：Springer US
- ISSN：1975-7220
- 卷排序：34
文摘
A new plating bath was developed to prevent palladium plating in the pores of the porous stainless steel support when using plate-type porous substrate. The plating bath, composed of a holder, a rubber O-ring and a bottom, provides very simple assembly and is very effective in preventing palladium plating in the pores of porous stainless steel. The agitation of the plating solution increases plating rate significantly because the agitation improves the external mass transfer of Pd ion and reducing agent to the membrane surface facilitating ~99.7% plating yield of palladium ion. This new plating method carried out at a temperature range of 293 to 298 K provides a very simple and economic membrane manufacturing process. Using a newly developed plating rig, an 88.9-mm diameter membrane was fabricated, and gas permeation tests showed that the hydrogen permeation flux reached ~0.9 mol s−1 m−2 at 873 K and a pressure difference of 300 kPa and selectivity (H2/N2) was ~1,850 at 873 K with a pressure difference of 100 kPa.