参考文献:1.Lu, Z., Xu, C., Zhao, X., et al.: Ultrasonic transmission testing of twin-robots coordinated control. In: 2013 IEEE International Conference on Mechatronics and Automation (pp. 1256-260). IEEE (2013) 2.Zhao, X., Gang, T.: Nonparaxial multi-Gaussian beam models and measurement models for phased array transducers. Ultrasonics 49(1), 126-30 (2009)CrossRef 3.Wen, J.J., Breazeale, M.A.: A diffraction beam field expressed as the superposition of Gaussian beams. J. Acoust. Soc. Am. 83(5), 1752-756 (1988)CrossRef 4.Kim, H.J., Song, S.J., Schmerr Jr, L.W.: Modeling ultrasonic pulse-echo signals from a flat-bottom hole in immersion testing using a multi-Gaussian beam. J. Nondestr. Eval. 23(1), 11-9 (2004)CrossRef 5.Kim, H.J., Park, J.S., Song, S.J., et al.: Modeling angle beam ultrasonic testing using multi-Gaussian beams. J. Nondestr. Eval. 23(3), 81-3 (2004)CrossRef 6.Ding, D., Zhang, Y., Liu, J.: Some extensions of the Gaussian beam expansion: radiation fields of the rectangular and the elliptical transducer. J. Acoust. Soc. Am. 113(6), 3043-048 (2003)CrossRef 7.Schmerr, L., Song, J.S.: Ultrasonic Nondestructive Evaluation Systems: Models and Measurements. Springer, New York (2007)CrossRef 8.Zhao, X., Gang, T., Xu, C.: Prediction of side-drilled hole signals captured by a dual crystal contact probe. J. Nondestr. Eval. 29(2), 105-10 (2010)CrossRef 9.Haase, W., Maurer, A.: Latest developments on industrial ultrasonic testing of aircraft components. In: Proceedings of the World Conference on Non-destructive Testing (pp. 225-36). Montreal (2004) 10.Yuan, K., Han, Z., Wang, B.: Water-squirting ultrasonic C-scan testing system for composite materials. Aeronaut. Manuf. Technol. 15, 101-03 (2009) 11.Bettayeb, F., Rachedi, T., Benbartaoui, H.: An improved automated ultrasonic NDE system by wavelet and neuron networks. Ultrasonics 42(1), 853-58 (2004)CrossRef 12.Wang, Y., Wu, R., Zhou, Z., et al.: Research on ultrasonic C-scan technique for large unsymmetric composite component. J. Zhejiang Univ. Eng. Sci. 38(9), 1208-211 (2004). (in Chinese) 13.Zheng, H., Zhou, X., Li, X., et al.: Research on error compensation of multi-joint ultrasonic robot base on ontology. Trans. Chin. Soc. Agric. Mach. 39(4), 164-67 (2008) 14.Voigt, T., Grosse, C.U., Sun, Z., et al.: Comparison of ultrasonic wave transmission and reflection measurements with P-and S-waves on early age mortar and concrete. Mater. Struct. 38(8), 729-38 (2005)CrossRef 15.Sha, Z., Gang, T., Zhao, X.: Simulation and visualization of radiated acoustic field of ultrasonic transducers. Nondestr. Test. 33(5), 2- (2011). (in Chinese) 16.Zhao, X.: Study on nondestructive evaluation of austenitic stainless steel welds based on ultrasonic modeling. HIT (2008) 17.Huang, R., Schmerr Jr, L.W., Sedov, A.: Multi-Gaussian ultrasonic beam modeling for multiple curved interfaces—an ABCD matrix approach. Res. Nondestr. Eval. 16(4), 143-74 (2005)CrossRef 18.Zhang, Y., Zhou, X., Yang, C., et al.: Ultrasonic probe position and orientation planning for curved components with variable thickness based on ultrasonic beam analysis. Trans. Chin. Soc. Agric. Mach. 43(9), 230-34 (2012)MathSciNet 19.Craig, J.J.: Introduction to Robotics: Mechanics and Control, 3rd edn. Pearson Prentice Hall, Upper Saddle River (2005)
1. School of Mechanical Engineering, Beijing Institute of Technology, Beijing, 100081, China
刊物类别:Engineering
刊物主题:Structural Mechanics Characterization and Evaluation Materials Vibration, Dynamical Systems and Control Mechanics
出版者:Springer Netherlands
ISSN:1573-4862
文摘
A nondestructive testing method for curved surfaces based on the multi-Gaussian beam model is proposed in this study. The multi-Gaussian beam model for composites coupled with water is introduced into an automatic ultrasonic testing system. A mathematical model of the received beam field is established to analyze the effect of different testing parameters on the receiving transducer. The normal vector can be calculated by variational methods to achieve the transmitting transducer’s position and orientation. The position and orientation of the receiving transducer can be achieved by coordinate transformation method. The simulation and experiments illustrate the validity and effectiveness of the proposed method. Experimental results indicate that the received signal is strong and measurement accuracy is high with the proposed method. The proposed method provides an effective solution to curved composite surface parts and would significantly benefit industrial development. Keywords Curved surface Ultrasonic testing Multi-Gaussian beam model Path planning Coordinate transformation