Effect of Yarn Distortion on the Mechanical Properties of Fiber-Bar Composites Reinforced by Three-Dimensional Weaving

详细信息    查看全文

• 作者：Huairong Kang ; Zhongde Shan ; Yong Zang ; Feng Liu
• 关键词：Fiber ; bar composites ; Finite element model (FEM) ; Mechanical properties ; Stochastic function ; Twisted yarn
• 刊名：Applied Composite Materials
• 出版年：2016
• 出版时间：April 2016
• 年：2016
• 卷：23
• 期：2
• 页码：119-138
• 全文大小：5,759 KB
• 参考文献：1.Potluri, P., Hogg, P., Arshad, M., Jetavat, D., Jamshidi, P.: Influence of fibre architecture on impact damage tolerance in 3D woven composites. Appl. Compos. Mater. 19(5), 799–812 (2012)CrossRef
  2.Bejan, L., Taranu, N., Sirbu, A.: Effect of hybridization on stiffness properties of woven textile composites. Appl. Compos. Mater. 20(2), 185–194 (2013)CrossRef
  3.Ai, S.G., Zhu, X.L., Mao, Y.Q., Peng, Y.M., Fang, D.N.: Finite element modeling of 3D orthogonal woven C/C composite based on micro-computed tomography experiment. Appl. Compos. Mater. 21, 603–614 (2014)CrossRef
  4.Phoenix, S.L.: Probabilistic inter-fiber dependence and the asymptotic strength distribution of classic fiber bundles. Int. J. Eng. Sci. 13, 287–304 (1975)CrossRef
  5.Phoenix, S.L.: Statistical theory for the strength of twisted fiber bundles with applications to yarns and cables. Text. Res. J. 49, 407–23 (1979)CrossRef
  6.Chudoba, R., Vořechovský, M., Konrad, M.: Stochastic modeling of multi-filament yarns: I. Random properties within the cross-section and size effect. Int. J. Solids Struct. 43, 413–434 (2006)CrossRef
  7.Vořechovský, M., Chudoba, R.: Stochastic modeling of multi-filament yarns: II. Random properties over the length and size effect. Int. J. Solids Struct. 43, 435–458 (2006)CrossRef
  8.Vořechovský, M.: Incorporation of statistical length scale into Weibull strength theory for composites. Compos. Struct. 92, 2027–2034 (2010)CrossRef
  9.Chudoba, R., Vořechovský, M., Eckers, V., Gries, T.: Effect of twist, fineness, loading rate and length on tensile behavior of multifilament yarns (a multivariatestudy). Text. Res. J. (Sage). 77(11), 880–91 (2007)CrossRef
  10.Lekou, D.J., Philippidis, T.P.: Mechanical property variability in FRP laminates and its effect on failure prediction. Compos. Part B 39, 1247–1256 (2008)CrossRef
  11.Jeong, H.K., Shenoi, R.A.: Probabilistic strength analysis of rectangular FRP plates using Monte Carlo simulation. Comput. Struct. 76(3), 219–235 (2000)CrossRef
  12.Onkar, A.K., Upadhyay, C.S., Yadav, D.: Probabilistic failure of laminated composite plates using the stochastic finite element method. Compos. Struct. 77(1), 79–91 (2007)CrossRef
  13.Chen, L., Tao, X.M., Choy, C.L.: On the microstructure of three-dimensional braided performs. Compos. Sci. Technol. 59, 391–404 (1999)CrossRef
  14.Yao, L., Wang, X., Xu, F.J., Jiang, M.W., Zhou, D.C., Qiu, Y.P.: Effect of wire space and weaving patternon performance of microstrip antennas integrated in the three dimensional orthogonal woven composites. Appl. Compos. Mater. 19(1), 21–30 (2012)CrossRef
  15.Cuong, H.M., Boussu, F., Kanit, T., Crepin, D., Imad, A.: Effect of frictions on the ballistic performanceof a 3D warp interlock fabric: numerical analysis. Appl. Compos. Mater. 19(3–4), 333–347 (2012)
  16.Matveeva, A.Y., Pyrlin, S.V., Ramos, M.M.D., Böhm, H.J., Hattum, F.W.J.: Influence of waviness and curliness of fibres on mechanical properties of composites. Comput. Mater. Sci. 87, 1–11 (2014)CrossRef
  17.Velmurugan, R., Srinivasulu, G., Jayasankar, S.: Influence of fiber waviness on the effective properties of discontinuous fiber reinforced composites. Comput. Mater. Sci. 91, 339–349 (2014)CrossRef
  18.Lemanski, S.L., Sutcliffe, M.P.F.: Compressive failure of finite size unidirectional composite laminates with a region of fibre waviness. Compos. Part A 43, 435–444 (2012)CrossRef
  19.Trials, D., Costa, J., Fiedler, B., Hobbiebrunken, T., Hurtado, J.E.: A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element. Compos. Sci. Technol. 66, 1766–1777 (2006)CrossRef
  20.Blacklock, M., Bale, H., Begley, M., Cox, B.: Generating virtual textile composite specimens using statistical data from micro-computed tomography: 1D tow representations for the Binary Model. J. Mech. Phys. Solids. 60, 451–470 (2012)CrossRef
  21.Rinaldi, R.G., Blacklock, M., Bale, H., Begley, M., Cox, B.N.: Generating virtual textile composite specimens using statistical data from micro-computed tomography: 3D tow representations. J. Mech. Phys. Solids. 60, 1561–1581 (2012)CrossRef
  22.Alkhateb, H., Al-Ostaz, A., Alzebdeh, K.I.: Developing a stochastic model to predict the strengthand crack path of random composites. Compos. Part B 40, 7–16 (2009)CrossRef
  23.Yushanov, S.P., Bogdanovich, A.E.: Analytical probability model of initial failure and reliability of laminated composite structures. Int. J. Solids Struct. 35(7–8), 665–685 (1998)CrossRef
  24.Vanaerschot, A., Cox, B.N., Lomov, S.V., Vandepitte, D.: Stochastic multi-scale modeling of textile composite based on internal geometry variability. Comput. Struct. 122, 55–64 (2013)CrossRef
  25.Guilleminot, J., Soize, C., Kondo, D., Binetruy, C.: Theoretical framework and experimental procedure for modeling mesoscopic volume fraction stochastic fluctuations in fiber reinforced composites. Int. J. Solids Struct. 45, 5567–5583 (2008)CrossRef
  26.Mehre, L., Doostan, A., Moens, D., Vandepitte, D.: Stochastic identification of composite material properties from limited experimental databases, Part II: Uncertainty modeling. Mech. Syst. Signal Process. 27, 484–498 (2012)CrossRef
  27.Yushanov, S.P., Bogdanovich, A.E.: Stochastic theory of composite materials with random waving of the reinforcements. Int. J. Solids Struct. 35(22), 2901–2930 (1998)CrossRef
  28.Fang, G.D., Liang, J., Wang, B.L.: The effect of yarn distortion on the mechanical properties of 3D four-directional braided composites. Compos. Part A 40, 343–350 (2009)CrossRef
  29.Chamis, C.C.: Mechanics of composites materials: past, present and future[J]. J. Compos. Technol. Res. 11(1), 3–14 (1989)CrossRef
  30.Chamis, C.C.: Simplified composite micromechanics equation for strength, fracture toughness, impact resistance and environmental effects[R]. NASA, N84-27832 (1984)
  31.Sun, H.Y., Qiao, X.: Prediction of the mechanical propertites of three-dimensionally braided composites. Compos. Sci. Technol. 57, 623–629 (1997)CrossRef
  32.Xia, Z.H., Zhou, C.W., Yong, Q.L., Wang, X.W.: On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites[J]. Int. J. Solids Struct. 43(2), 266–278 (2006)CrossRef
  33.ASTM D3039/D3039M-00, standard test method for tensile properties of polymer matrix composite materials [S], (2000)
  34.Shan, Z.D., Kang, H.R., Zang, Y., Liu, F.: Microscopic Structure model and finite element simulation of mechanical properties of fiber-bar composites reinforced by three dimensional weaving. Acta Mater Compos Sin. 32(1), 138–149 (2015)
  35.Xu, K., Xu, X.W.: Nonlinear numerical analysis of progressive damage of 3D braided composites. Chin J Theor Appl Mech. 39(3), 398–407 (2007)
  
• 作者单位：Huairong Kang (1) (2)
  Zhongde Shan (1)
  Yong Zang (2)
  Feng Liu (1)
  
  1. State Key Lab of Advanced Forming Technology & Equipment, China Academy of Machinery Science & Technology, Beijing, 100083, China
  2. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, 100083, China
  
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Characterization and Evaluation Materials
  Mechanics
  Polymer Sciences
  Industrial Chemistry and Chemical Engineering
  
• 出版者：Springer Netherlands
• ISSN：1573-4897

文摘

A meso-structure model of fiber-bar composites reinforced by three-dimensional weaving (FBCR3DW) is proposed. Optical microscopy images of the preform structure revealed that the fibers along the circumference of the yarn cross-weave were twisted randomly due to alternating yarn winding on either side of the fiber bars during the manufacturing process. Sections of the cross-woven yarn were divided into five regions based on the twist characteristics. Stochastic function theory was used to describe the twist characteristics and to calculate the compliance tensor for each twisted yarn region. The twist characteristics and compliance tensor of each region were then introduced into a finite element model to calculate the elastic properties of the twisted yarn and FBCR3DW; unidirectional tensile stress–strain curves were generated based on the Tsai–Wu failure criterion. Several FBCR3DW specimens with randomly twisted yarns inside the weave structure were used in experimental tests. Our numerical results were in good agreement with the experimental values. Yarn distortion had a significant effect on the elastic properties and axial tensile strength of the yarn; specifically, the influence of yarn distortion on the transverse elastic modulus and transverse shear modulus of FBCR3DW was severe, whereas only a slight effect occurred with regard to the other elastic constants and unidirectional tensile properties. Thus, the proposed method provides an effective reference for modeling fiber composites with a weave structure.