Effect of coupling asynchronous acoustoelectric effects on the corrosion behavior, microhardness and biocompatibility of biomedical titanium alloy strips

详细信息    查看全文

• 作者：Xiaoxin Ye (1) (2)
  Guoyi Tang (1) (2)
  
  1. Advanced Materials Institute ; Graduate School at Shenzhen ; Tsinghua University ; Shenzhen ; 518055 ; People鈥檚 Republic of China
  2. Key Laboratory for Advanced Materials of Ministry of Education ; Department of Materials Science and Engineering ; Tsinghua University ; Beijing ; 100084 ; People鈥檚 Republic of China
  
• 刊名：Journal of Materials Science Materials in Medicine
• 出版年：2015
• 出版时间：January 2015
• 年：2015
• 卷：26
• 期：1
• 全文大小：3,498 KB
• 参考文献：1. Hayakawa, S, Masuda, Y, Okamoto, K, Shirosaki, Y, Kato, K, Osaka, A (2014) Liquid phase deposited titania coating to enable in vitro apatite formation on Ti6Al4V alloy. J Mater Sci 25: pp. 375-381
  2. Rosalbino, F, Delsante, S, Borzone, G, Scavino, G (2012) Influence of noble metals alloying additions on the corrosion behaviour of titanium in a fluoride-containing environment. J Mater Sci 23: pp. 1129-1137
  3. Zareidoost, A, Yousefpour, M, Ghaseme, B, Amanzadeh, A (2012) The relationship of surface roughness and cell response of chemical surface modification of titanium. J Mater Sci 23: pp. 1479-1488
  4. Nakagawa, M, Matono, Y, Matsuya, S, Udoh, K, Ishikawa, K (2005) The effect of Pt and Pd alloying additions on the corrosion behavior of titanium in fluoride-containing environments. Biomaterials 26: pp. 2239-2246 materials.2004.07.022" target="_blank" title="It opens in new window">CrossRef
  5. Luo, R, Liu, ZD, Yan, FX, Kong, Y, Zhang, YT (2013) The biocompatibility of hydroxyapatite film deposition on micro-arc oxidation Ti6Al4V alloy. Appl Surf Sci 266: pp. 57-61 CrossRef
  6. Martinesi, M, Stio, M, Treves, C, Borgioli, F (2013) Biocompatibility studies of low temperature nitrided and collagen-I coated AISI 316L austenitic stainless steel. J Mater Sci 24: pp. 1501-1513
  7. Li, XY, Tang, B, Ye, JR (2012) Fabrication of Zr and Zr-N surface alloying layers and hardness improvement of Ti鈥?Al鈥?V alloy by plasma surface alloying technique. Appl Surf Sci 258: pp. 1981-1984 CrossRef
  8. Ye, X, Kuang, J, Li, X, Tang, G (2014) Microstructure, properties and temperature evolution of electro-pulsing treated functionally graded Ti鈥?Al鈥?V alloy strip. J Alloy Compd 599: pp. 1-9 CrossRef
  9. Ye, X, Li, X, Song, G, Tang, G (2014) Effect of recovering damage and improving microstructure in the titanium alloy strip under high-energy electropulses. J Alloy Compd.
  10. Ye, X, Yang, Y, Song, G, Tang, G (2014) Enhancement of ductility, weakening of anisotropy behavior and local recrystallization in cold-rolled Ti-6Al-4V alloy strips by high-density electropulsing treatment. Appl Phys A.
  11. Sun, YS, Chang, JH, Huang, HH (2013) Corrosion resistance and biocompatibility of titanium surface coated with amorphous tantalum pentoxide. Thin Solid Films 528: pp. 130-135 CrossRef
  12. Liu, G, Lu, J, Lu, K (2000) Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening. Mat Sci Eng A 286: pp. 91-95 CrossRef
  13. Mordyuk, BN, Prokopenko, GI (2007) Ultrasonic impact peening for the surface properties鈥?management. J Sound Vib 308: pp. 855-866 CrossRef
  14. Allenstein, U, Ma, Y, Arabi-Hashemi, A, Zink, M, Mayr, SG (2013) Fe-Pd based ferromagnetic shape memory actuators for medical applications: biocompatibility, effect of surface roughness and protein coatings. Acta Biomater 9: pp. 5845-5853 CrossRef
  15. Wirth, C, Comte, V, Lagneau, C, Exbrayat, P, Lissac, M, Jaffrezic-Renault, N, Ponsonnet, L (2005) Nitinol surface roughness modulates in vitro cell response: a comparison between fibroblasts and osteoblasts. Mater Sci Eng C 25: pp. 51-60 CrossRef
  16. Wei, CH, Pan, WJ, Hung, MS (2013) The effects of substrate roughness and associated surface properties on the biocompatibility of diamond-like carbon films. Surf Coat Technol 224: pp. 8-17 CrossRef
  17. Candan, S, Turkmen, M, Ahlatci, H, Candan, E (2010) Corrosion resistance of powder injection moulded titanium in physiologic serum and artificial saliva. Acta Metall Sin 23: pp. 197-205
  18. Schiff, N, Grosgogeat, B, Lissac, M, Dalard, F (2004) Influence of fluoridated mouthwashes on corrosion resistance of orthodontics wires. Biomaterials 25: pp. 4535-4542 materials.2003.11.042" target="_blank" title="It opens in new window">CrossRef
  19. Schiff, N, Grosgogeat, B, Lissac, M, Dalard, F (2002) Influence of fluoride content and pH on the corrosion resistance of titanium and its alloys. Biomaterials 23: pp. 1995-2002 CrossRef
  20. Chou, TS (1997) Recrystallisation behaviour and grain structure in mechanically alloyed oxide dispersion strengthened MA956 steel. Mater Sci Eng A 223: pp. 78-90 CrossRef
  21. Lu, YP, Molodov, DA, Gottstein, G (2011) Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe-Mn-C alloy. Acta Mater 59: pp. 3229-3243 CrossRef
  22. Lei, G, Guoyi, T, Yanbin, J, Chu, PK (2009) Texture evolution in cold-rolled AZ31 magnesium alloy during electropulsing treatment. J Alloy Compd 487: pp. 309-313 CrossRef
  23. Bailey, J, Weber, ER, Opsal, J, Rosencwaig, A (1991) Nonthermal laser-induced recrystallization of amorphous-silicon. Phys Rev B 44: pp. 13116-13119 CrossRef
  24. Bailey, JM, Gwathmey, AT (1960) Dislocation arrays in depth and recrystallization produced by surface deformation of single crystals of copper at high temperature. J Appl Phys 31: pp. 215-217 CrossRef
  25. Xu, Z, Tang, G, Ding, F, Tian, S, Tian, H (2007) The effect of multiple pulse treatment on the recrystallization behavior of Mg-3Al-1Zn alloy strip. Appl Phys A 88: pp. 429-433 CrossRef
  26. Jiang, YB, Tang, GY, Shek, C, Zhu, YH, Xu, ZH (2009) On the thermodynamics and kinetics of electropulsing induced dissolution of beta-Mg17Al12 phase in an aged Mg-9Al-1Zn alloy. Acta Mater 57: pp. 4797-4808 CrossRef
  27. Zhang, ZM, Xu, HY, Li, BC (2010) Corrosion properties of plastically deformed AZ80 magnesium alloy. Trans Nonferr Met Soc 202: pp. S697-S702 CrossRef
  28. Sharon, JA, Zhang, Y, Mompiou, F, Legros, M, Hemker, KJ (2014) Discerning size effect strengthening in ultrafine-grained Mg thin films. Scr Mater 75: pp. 10-13 CrossRef
  29. Yang, XJ, Zhou, JX, Ling, X (2012) Study on plastic damage of AISI 304 stainless steel induced by ultrasonic impact treatment. Mater Des 36: pp. 477-481 CrossRef
  30. Lee, YH, Bhattarai, G, Aryal, S, Lee, NH, Lee, MH, Kim, TG, Jhee, EC, Kim, HY, Yi, HK (2010) Modified titanium surface with gelatin nano gold composite increases osteoblast cell biocompatibility. Appl Surf Sci 256: pp. 5882-5887 CrossRef
  
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Biomaterials
  Characterization and Evaluation Materials
  Polymer Sciences
  Metallic Materials
  Ceramics,Glass,Composites,Natural Materials
  Surfaces and Interfaces and Thin Films
  
• 出版者：Springer Netherlands
• ISSN：1573-4838

文摘

The coupling asynchronous acoustoelectric effects (CAAE) of the high-energy electropulsing treatment (EPT) technique and ultrasonic surface strengthening modification (USSM) are innovatively combined in improving the surface microhardness, corrosion behavior and biocompatibility of the pre-deformed titanium alloy strips. Experimental results show that EPT and USSM processes facilitate the surface grain refining and USSM brings in the micro-dimples on the materials surface, which is attributed to the atoms diffusion acceleration under EPT and severe surface plastic deformation under USSM. These microstructure changes can not only enhance the corrosion resistance in the acidic simulated body fluids and fluoridated acidic artificial saliva but also improve the biocompatibility of the titanium alloy strip materials. Moreover, the surface microhardness of the titanium alloy strips is enhanced to improve the wear resistance. Therefore, CAAE processing is a high-efficiency and energy-saving method for obtaining biomedical titanium alloys with superior anti-corrosion performance, microhardness and biocompatibility, which can be widely applied in dental implants and artificial joint.