Natural Convection Heat Transfer of a Nanofluid into a Cubical Enclosure: Lattice Boltzmann Investigation

详细信息    查看全文

• 作者：Abdelkader Boutra ; Karim Ragui ; Nabila Labsi…
• 刊名：Arabian Journal for Science and Engineering
• 出版年：2016
• 出版时间：May 2016
• 年：2016
• 卷：41
• 期：5
• 页码：1969-1980
• 全文大小：3,523 KB
• 刊物类别：Engineering
• 刊物主题：Engineering, general
  Mathematics
  Science, general
  
• 出版者：Springer Berlin / Heidelberg
• 卷排序：41

文摘

Through this paper, the hydrodynamic and thermal characteristics of Ag–water nanofluid, filling a differentially heated cubic enclosure, are numerically investigated. To do so, a developed computer code based on the lattice Boltzmann approach coupled with the finite-difference method is used. The later has been validated after comparison between the obtained results and experimental and numerical ones already found in the literature. To make clear the effect of main parameters such as the Rayleigh number, the nanoparticle volume fraction, and the enclosure inclination angle, the convection phenomenon was reported by means of streamlines, temperature iso-surfaces, and velocity and temperature profiles. A special attention was paid to the Nusselt number evolution. Compared to a 2D investigation, and when the convection mode dominates, taking into account the third direction leads to significant modifications on the nanofluid motion and heat transfer as well. As the conductive regime dominates, the use of a 2D configuration is found to be valid to predict the studied phenomenon. It is to note that the three-dimensional D3Q19 model was adopted based on a cubic lattice, where each pattern of the later is characterized by 19 discrete speeds.KeywordsComputational fluid flow and heat transferNatural convectionAg–water nanofluidCubical enclosureLattice Boltzmann method