Using Improved Product-Coded Modulation Codes to Reduce the Peak-to-Average Power Ratio in Single-Carrier Frequency Division Multiple Access Systems

详细信息    查看全文

• 作者：Hsin-Ying Liang ; Cheng-Ying Yang ; Kuang-Hao Lin…
• 关键词：SC ; FDMA ; PAPR ; Product ; coded modulation codes ; SLM ; Reed–Muller codes
• 刊名：Wireless Personal Communications
• 出版年：2016
• 出版时间：December 2016
• 年：2016
• 卷：91
• 期：3
• 页码：1345-1357
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Communications Engineering, Networks; Signal,Image and Speech Processing; Computer Communication Networks;
• 出版者：Springer US
• ISSN：1572-834X
• 卷排序：91

文摘

Single-carrier frequency division multiple access (SC-FDMA) is a wireless transmission technology based on orthogonal frequency-division multiplexing. SC-FDMA is considered an uplink transmission technology according to long-term evolution standards and long-term evolution advanced standards, the latter of which is the transmission standard for fourth-generation mobile communication systems. A peak-to-average power ratio (PAPR) can be used to assess the power efficiency of transmitters. For a transmitter, a higher PAPR indicates lower power efficiency. The PAPR of an SC-FDMA system increases as the order of modulation increases, reducing the efficiency of the power amplifier. The method suggested in this paper is a new PAPR improvement technique based on product-coded modulation codes, in which the component codes of the product codes are built using Reed–Muller codes. The suggested method uses product-coded modulation to develop selective mapping (SLM). Unlike the traditional SLM technique, this method does not require side information to be transmitted to the receiver but proposes a mechanism for producing a phase factor to improve PAPR performance. The simulation results show that the suggested method produces higher PAPR efficiency compared with the conventional SC-FDMA system. In addition, multilevel coding, modulation technology, and PAPR improvement techniques are integrated into the suggested method to improve coding gains as well as spectral and PAPR efficiency.