Rheo-PIV analysis of the slip flow of a metallocene linear low-density polyethylene melt

详细信息    查看全文

• 作者：Francisco Rodr¨ªguez-Gonz¨¢lez ; Jos¨¦ P¨¦rez-Gonz¨¢lez ; Lourdes de Vargas and Benjam¨ªn M. Mar¨ªn-Santib¨¢?ez
• 关键词：PIV ; Slip velocity ; Extrusion ; Polyethylene ; Metallocene
• 刊名：Rheologica Acta
• 出版年：2010
• 出版时间：February, 2010
• 年：2010
• 卷：49
• 期：2
• 页码：145-154
• 全文大小：851.9 KB

文摘

The continuous extrusion of a metallocene linear low-density polyethylene through a transparent capillary die with and without slip was analyzed in this work by rheometrical measurements and particle image velocimetry (PIV). For this reason, a comparison was made between the rheological behaviors of the pure polymer and blended with a small amount of fluoropolymer polymer processing additive. Very good agreement was found between rheometrical and PIV measurements. The pure polymer exhibited stick-slip instabilities with nonhomogeneous slip at the die wall, whereas the blend showed stable flow. The slip velocity was measured directly from the velocity profiles and was negligible for the pure polymer before the stick-slip but increased monotonously as a function of the shear stress for the blend. The flow curves and the slip velocity as a function of the shear stress deviated from a power law and were well fitted by continuous “kink” functions. Comparison of PIV data with rheometrical ones permitted a direct proof of the basic assumption of the Mooney theory. Finally, the analysis of the velocity profiles showed that there is a maximum in the contribution of slip to the average fluid velocity, which is interpreted as the impossibility for the velocity profile to become plug like in the presence of shear thinning.