参考文献:1. Fichtner F, Mahlin D, Welch K, Gaisford S, Alderborn G. Effect of surface energy on powder compactibility. Pharm Res. 2008;25(12):2750鈥?. CrossRef 2. Castellanos A. The relationship between attractive interparticle forces and bulk behaviour in dry and uncharged fine powders. Adv Phys. 2005;54(4):263鈥?76. CrossRef 3. Kumar A, Staedler T, Jiang X. Role of relative size of asperities and adhering particles on the adhesion force. J Colloid Interface Sci. 2013;409:211鈥?. CrossRef 4. Podczeck F, Mia Y. The influence of particle size and shape on the angle of internal friction and the flow factor of unlubricated and lubricated powders. Int J Pharm. 1996;144(2):187鈥?4. CrossRef 5. Rasenack N, M眉ller BW. Crystal habit and tableting behavior. Int J Pharm. 2002;244(1鈥?):45鈥?7. CrossRef 6. Kaerger JS, Edge S, Price R. Influence of particle size and shape on flowability and compactibility of binary mixtures of paracetamol and microcrystalline cellulose. Eur J Pharm Sci. 2004;22(2鈥?):173鈥?. CrossRef 7. Lam KK, Newton JM. Influence of particle size on the adhesion behaviour of powders, after application of an initial press-on force. Powder Technol. 1992;73(2):117鈥?5. CrossRef 8. Heng JYY, Bismarck A, Williams DR. Anisotropic surface chemistry of crystalline pharmaceutical solids. AAPS PharmSciTech. 2006;7(4):12鈥?0. CrossRef 9. Planins虅ek O, Zadnik J, Kunaver M, Src虅ic虅 S, Godec A. Structural evolution of indomethacin particles upon milling: time-resolved quantification and localization of disordered structure studied by IGC and DSC. J Pharm Sci. 2010;99(4):1968鈥?1. 10. Smith AP, Shay JS, Spontak RJ, Balik CM, Ade H, Smith SD, / et al. High-energy mechanical milling of poly (methyl methacrylate), polyisoprene and poly (ethylene-alt-propylene). Polym J. 2000;41(16):6271鈥?3. CrossRef 11. Wong LW, Pilpel N. The effect of particle shape on the mechanical properties of powders. Int J Pharm. 1990;59(2):145鈥?4. CrossRef 12. Farley R, Valentin FHH. Effect of particle size upon the strength of powders. Powder Technol. 1968;1(6):344鈥?4. CrossRef 13. Heng JYY, Williams DR. Wettability of paracetamol polymorphic forms I and II. Langmuir. 2006;22(16):6905鈥?. CrossRef 14. Heng JYY, Bismarck A, Lee AF, Wilson K, Williams DR. Anisotropic surface chemistry of aspirin crystals. J Pharm Sci. 2007;96(8):2134鈥?4. CrossRef 15. Ho R, Heng JYY, Dilworth SE, Williams DR. Wetting behavior of ibuprofen racemate surfaces. J Adhes. 2008;84(6):483鈥?01. CrossRef 16. Ho R, Hinder SJ, Watts JF, Dilworth SE, Williams DR, Heng JYY. Determination of surface heterogeneity of d-mannitol by sessile drop contact angle and finite concentration inverse gas chromatography. Int J Pharm. 2010;387(1鈥?):79鈥?6. CrossRef 17. Heng JYY, Thielmann F, Williams DR. The effects of milling on the surface properties of form I paracetamol crystals. Pharm Res. 2006;23(8):1918鈥?7. CrossRef 18. Ho R, Naderi M, Heng JYY, Williams DR, Thielmann F, Bouza P, / et al. Effect of milling on particle shape and surface energy heterogeneity of needle-shaped crystals. Pharm Res. 2012;29(10):2806鈥?6. CrossRef 19. Thielmann F, Burnett DJ, Heng JYY. Determination of the surface energy distributions of different processed lactose. Drug Dev Ind Pharm. 2007;33(11):1240鈥?3. CrossRef 20. Das SC, Stewart PJ. Characterising surface energy of pharmaceutical powders by inverse gas chromatography at finite dilution. J Pharm Pharmacol. 2012;64(9):1337鈥?8. CrossRef 21. Al-Chalabi SAM, Jones AR, Luckham PF. A simple method for improving the dispersability of micron-sized solid spheres. J Aerosol Sci. 1990;21(6):821鈥?. CrossRef 22. Schultz J, Lavielle L, Martin C. The role of the interface in carbon fibre-epoxy composites. J Adhes. 1987;23(1):45鈥?0. CrossRef 23. Van Oss CJ, Chaudhury MK, Good RJ. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems. Chem Rev. 1988;88(6):927鈥?1. CrossRef 24. Das SC, Larson I, Morton DAV, Stewart PJ. Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography. Langmuir. 2010;27(2):521鈥?. CrossRef 25. Fowkes FM. Determination of interfacial tensions, contact angles, and dispersion forces in surfaces by assuming additivity of intermolecular interactions in surfaces. J Phys Chem. 1962;66(2):382. CrossRef 26. Owens DK, Wendt RC. Estimation of the surface free energy of polymers. J Appl Polym Sci. 1969;13(8):1741鈥?. CrossRef 27. Etzler FM. Characterisation of surface free energies and surface chemistry of solids. In: Mittal KL, editor. Contact angle, wettability and adhesion. Utrecht, The Netherlands: VSP; 2003. p. 219鈥?3. 28. Dorris GM, Gray DG. Adsorption of n-alkanes at zero surface coverage on cellulose paper and wood fibers. J Colloid Interface Sci. 1980;77(2):353鈥?2. CrossRef 29. Panzer U, Schreiber HP. On the evaluation of surface interactions by inverse gas chromatography. Macromolecules. 1992;25(14):3633鈥?. CrossRef 30. Volpe CD, Siboni S. Some reflections on acid鈥揵ase solid surface free energy theories. J Colloid Interface Sci. 1997;195(1):121鈥?6. CrossRef 31. Clint JH, Dunstan TS. Acid鈥揵ase components of solid surfaces and the triboelectric series. Europhys Lett. 2001;54(3):320. CrossRef 32. Ho R, Heng JYY. A review of inverse gas chromatography and its development as a tool to characterize anisotropic surface properties of pharmaceutical solids. Kona Powder Part J. 2013;30:164鈥?0. CrossRef 33. Gamble JF, Chiu WS, Tobyn MJ. Investigation into the impact of sub-populations of agglomerates on the particle size distribution and flow properties of conventional microcrystalline cellulose grades. Pharm Dev Technol. 2011;16(5):542鈥?. CrossRef 34. Wang D. Advanced physical characterisation of milled pharmaceutical solids, PhD Thesis. London: Imperial College London; 2013. 35. Head KH. Manual of soil laboratory testing. 2nd ed. New York: Pantech Press; 1994. 36. Guoxian L, Erde W, Zhongren W. Effects of ball-milling intensity on the amorphization rate of mixed Ni50Ti50 powders. J Mater Process Technol. 1995;51(1鈥?):122鈥?0. CrossRef 37. Mackin L, Zanon R, Park JM, Foster K, Opalenik H, Demonte M. Quantification of low levels (<10%) of amorphous content in micronised active batches using dynamic vapour sorption and isothermal microcalorimetry. Int J Pharm. 2002;231(2):227鈥?6. CrossRef 38. H眉ttenrauch R, Fricke S, Zielke P. Mechanical activation of pharmaceutical systems. Pharm Res. 1985;2(6):302鈥?. CrossRef 39. Ksia偶ek K, Wacke S, G贸recki T, Cz G. Effect of the milling conditions on the degree of amorphization of selenium by milling in a planetary ball mill. J Phys Conf Ser. 2007;79(1):012037. CrossRef 40. Crowley KJ, Zografi G. Cryogenic grinding of indomethacin polymorphs and solvates: assessment of amorphous phase formation and amorphous phase physical stability. J Pharm Sci. 2002;91(2):492鈥?07. CrossRef 41. Elamin AA, Sebhatu T, Ahlneck C. The use of amorphous model substances to study mechanically activated materials in the solid state. Int J Pharm. 1995;119(1):25鈥?6. CrossRef 42. Hurtta M, Pitk盲nen I. Quantification of low levels of amorphous content in maltitol. Thermochim Acta. 2004;419(1鈥?):19鈥?9. CrossRef 43. Mullin JW. Crystallization. Oxford: Elsevier Butterworth-Heinemann; 2001. 44. Zhang J, Ebbens S, Chen X, Jin Z, Luk S, Madden C, / et al. Determination of the surface free energy of crystalline and amorphous lactose by atomic force microscopy adhesion measurement. Pharm Res. 2006;23(2):401鈥?. CrossRef 45. Ward S, Perkins M, Zhang J, Roberts CJ, Madden CE, Luk SY, / et al. Identifying and mapping surface amorphous domains. Pharm Res. 2005;22(7):1195鈥?02. CrossRef 46. Briggs D, Seah MP. Practical surface analysis by ager and X-ray photoelectron spectroscopy. 1st ed. New York: Wiley; 1983. 47. Beamson G, Briggs D. High resolution XPS of organic polymers, the scienta ESCA300 database. 1st ed. Chichester: Wiley; 1992. 48. SeethaLekshmi S, Guru Row TN. Conformational polymorphism in a non-steroidal anti-inflammatory drug, mefenamic acid. Cryst Growth Des. 2012;12(8):4283鈥?. CrossRef
刊物类别:Biomedical and Life Sciences
刊物主题:Biomedicine Pharmacology and Toxicology Pharmacy Biochemistry Medical Law Biomedical Engineering