In-plane shear properties of medium-density fibreboard measured by asymmetric four-point bending of a notched specimen

详细信息    查看全文

• 作者：Hiroshi Yoshihara ; Shungo Suzuki ; Masahiro Yoshinobu
• 刊名：Wood Science and Technology
• 出版年：2016
• 出版时间：May 2016
• 年：2016
• 卷：50
• 期：3
• 页码：475-487
• 全文大小：1,053 KB
• 参考文献：ASTM D 1037-12 (2012) Standard test methods for evaluating properties of wood-base fiber and particle panel materials. ASTM International, West Conshohocken
  BS EN 789-2004 (2004) Test method. Determination of mechanical properties of wood based panelss. BSI, London
  Davies P, Blackman BRK, Brunner AJ (2001) Mode II delamination. In: Moore DR, Pavan A, Williams JG (eds) Fracture mechanics testing methods for polymers adhesive and composites, ESIS Publication 28. Elsevier, Amsterdam, pp 307–333CrossRef
  De Magistris F, Salmén L (2004) Combined shear and compression analysis using the Iosipescu device: analytical and experimental studies of medium density fiberboard. Wood Sci Technol 37(6):509–521CrossRef
  Lee AWC, Stephens CB (1988) Comparative shear strength of seven types of wood composite panels at high and medium relative humidity conditions. For Prod J 38(3):49–52
  Matsumoto N, Nairn JA (2009) The fracture toughness of medium density fiberboard (MDF) including the effects of fiber bridging and crack-plane interference. Eng Fract Mech 76(18):2748–2757CrossRef
  McNatt JD (1969) Rail shear test for evaluating edgewise shear properties of wood-base panel products. For Prod Lab Rep 117:1–15
  Morita H, Fujimoto Y, Komatsu K, Murase Y (2006) Development of a shear testing method for full-sized structural lumber. Mokuzai Gakkaishi 52(6):376–382CrossRef
  Nairn JA (2009) Analytical and numerical modeling of R curves for cracks with bridging zones. Int J Fract 155(2):167–181CrossRef
  Ohno H, Kameyama Y, Suzuki H, Yoshida K, Matsumoto K, Ishiguri F, Yokota S, Iizuka K, Yoshizawa N (2010) Shearing strength performance in laminated lumber composed of several softwoods with the same modulus of elasticity. Mokuzai Gakkaishi 56(3):182–188CrossRef
  Schulte M, Frühwald A (1996) Shear modulus, internal bond and density profile of medium density fibre board (MDF). Holz Roh-Werkst 54(1):49–55CrossRef
  Sebera V, Tippner J, Šimek M, Šrajer J, Děcký D, Klímová H (2014) Poisson’s ratio of the MDF in respect to vertical density profile. Eur J Wood Prod 72(3):407–410CrossRef
  Sliseris J, Andrä H, Kabel M, Dix B, Plinke B, Wiriadi O, Frolovs G (2014) Numerical prediction of the stiffness and strength of medium density fiberboards. Mech Mater 79:73–84CrossRef
  Suzuki S, Miyagawa H (2003) Effect of element type on the internal bond quality of wood-based panels determined by three methods. J Wood Sci 49(6):513–518
  Suzuki S, Piao CX, Saito F (1987) A study evaluating the internal bond properties of MDF. Bull Fac Agric Shizuoka Univ 37:55–60
  Suzuki S, Nawa D, Miyamoto K, Shibusawa T (2000) Shear through-thickness properties of wood-based panels determined by the two-rail shear and edgewise shear methods. J Soc Mater Sci Jpn 49(4):395–400CrossRef
  Tarnopol’skii YM, Arnautov AK, Kulakov VL (1999) Methods of determination of shear properties of textile composites. Compos A 30(7):879–885CrossRef
  Tarnopol’skii YM, Kulakov VL, Arnautov AK (2000) Measurement of shear characteristics of textile composites. Comput Struct 76(1–3):115–123CrossRef
  Ünal Ö, Dayal V (2003) Interlaminar shear strength measurement of ceramic composites by asymmetric four point bend shear test. Mater Sci Eng A 340(1–2):170–174CrossRef
  Ünal Ö, Barnard DJ, Anderson IE (1999) A shear test method to measure shear strength of metallic materials and solder joints using small specimens. Scr Mater 40(3):271–276CrossRef
  Wilczyński A, Kociszewski M (2007) Bending properties of particleboard and MDF layers. Holzforschung 61(6):717–722
  Xavier J, Belini U, Pierron F, Morais J, Lousada J, Tomazello M (2013) Characterisation of the bending stiffness components of MDF panels from full-field slope measurements. Wood Sci Technol 47(2):423–441CrossRef
  Yoshihara H (2009) Shear properties of wood measured by the asymmetric four-point bending test of notched specimen. Holzforschung 63(2):211–216CrossRef
  Yoshihara H (2010) Edgewise shear properties of 5-ply wood obtained from the asymmetric four-point bending and uniaxial-tension tests of notched specimen. J Soc Mater Sci Jpn 59(4):291–296CrossRef
  Yoshihara H (2011) Measurement of the Young’s modulus and shear modulus of in-plane quasi-isotropic medium-density fiberboard by flexural vibration. Bioresources 6(4):4871–4885
  Yoshihara H (2012) Interlaminar shear strength of medium-density fiberboard obtained from asymmetrical four-point bending tests. Constr Build Mater 34(1):11–15CrossRef
  Yoshihara H (2013) Interlaminar shear strength of medium-density fiberboard (MDF) measured by three-point short-beam shear test and comparison with that obtained by asymmetric four-point bending test. Trans Jpn Mech Soc A 79(1):105–115CrossRef
  Yoshihara H (2014) Plasticity analysis of the strain in the tangential direction of solid wood subjected to compression load in the longitudinal direction. Bioresources 9(1):1097–1110CrossRef
  Yoshihara H, Suzuki A (2005) Shear stress/shear strain relation of wood obtained by asymmetric four-point bending test of side-tapered specimen. J Test Eval 33(1):55–60
  Yoshihara H, Yoshinobu M (2014) Interlaminar shear strength of plywood measured by three-point and asymmetric four-point short beam shear test. Mokuzai Kogyo 69(5):204–207
  Yoshihara H, Yoshinobu M (2015a) In-plane shear strength of paper obtained by asymmetric four-point bending test. Holzforschung 69(1):41–52CrossRef
  Yoshihara H, Yoshinobu M (2015b) Measurement of the in-plane shear modulus of medium-density fibreboard by torsional and flexural vibration tests. Measurement 60:33–38CrossRef
  
• 作者单位：Hiroshi Yoshihara (1)
  Shungo Suzuki (1)
  Masahiro Yoshinobu (1)
  
  1. Faculty of Science and Engineering, Shimane University, Nishikawazu-cho 1060, Matsue, Shimane, 690-8504, Japan
  
• 刊物类别：Biomedical and Life Sciences
• 刊物主题：Life Sciences
  Wood Science and Technology
  Ceramics,Glass,Composites,Natural Materials
  Operating Procedures and Materials Treatment
  
• 出版者：Springer Berlin / Heidelberg
• ISSN：1432-5225

文摘

In this research, asymmetric four-point bending (AFPB) tests were used to obtain the in-plane shear (IPS) properties of medium-density fibreboard (MDF). Circular notches were cut on the top and bottom surfaces of rectangular MDF bars with variable distances between the notch roots. Both tab-free and tabbed specimens were prepared from these bars. The AFPB tests were conducted using these specimens, and three IPS properties, that is, the shear modulus, proportional limit stress, and stress at failure, were measured. When using tabs, the IPS properties could be obtained for a wide range of the notch root distances, although the failure initiated at the notch roots led to the catastrophic failure.