Influence of the thermo-hydro-mechanical treatments of wood on the performance against wood-degrading fungi

详细信息    查看全文

• 作者：Bo?tjan Lesar (1)
  Miha Humar (1)
  Frederick A. Kamke (2)
  Andreja Kutnar (3) (4)
  
• 刊名：Wood Science and Technology
• 出版年：2013
• 出版时间：September 2013
• 年：2013
• 卷：47
• 期：5
• 页码：977-992
• 全文大小：396KB
• 参考文献：1. Bekhta P, Niemz P (2003) Effect of high temperature on the change in color, dimensional stability, and mechanical properties of spruce wood. Holzforschung 57:539-46 CrossRef
  2. Blomberg J, Persson B (2004) Plastic deformation in small clear pieces of Scots pine ( / Pinus sylvestris) during densification with the CaLignum process. J Wood Sci 50(4):307-14 CrossRef
  3. Blomberg J, Persson B, Bexell U (2006) Effects of semi-isostatic densification on anatomy and cell-shape recovery on soaking. Holzforschung 60:322-31 CrossRef
  4. Brock T, Groteklaes M, Mischke P (2000) European coatings handbook. Hannover, Vincentz Verlag 410 p
  5. Curling SF, Clausen CA, Winandy JE (2002) Relationship between mechanical properties, weight loss and chemical composition of wood during incipient brown-rot decay. Forest Prod J 52:34-9
  6. Dwianto W, Morooka T, Norimoto M, Kitajima T (1999) Stress relaxation of Sugi ( / Cryptomeria japonica D. Don) wood in radial compression under high temperature steam. Holzforschung 53(5):541-46 CrossRef
  7. EN 350-2 (1994) Durability of wood and wood-based products—Natural durability of solid wood—Part 2: guide to natural durability and treatability of selected wood species of importance in Europe
  8. EN 113 (2004) Wood preservatives—test method for determining the protective effectiveness against wood destroying basidiomycetes—determination of the toxic values
  9. Esteves B, Marques AV, Domingos I, Pereira H (2008) Heat-induced colour changes of pine ( / Pinus pinaster) and eucalyptus ( / Eucalyptus globulus) wood. Wood Sci Technol 42:369-84 CrossRef
  10. Hakkou M, Petrissans M, Zoulalian A, Gerardin P (2005) Investigation of wood wettability changes during heat treatment on the basis of chemical analysis. Polym Degrad Stab 89:1- CrossRef
  11. Hakkou M, Petrissans M, Gerardin P, Zoulalian A (2006) Investigations of the reasons for fungal durability of heat-treated beech wood. Polym Degrad Stab 91:393-97 CrossRef
  12. Homan WJ, Jorissen AJM (2004) Wood modification developments. Heron 49(4):361-86
  13. Humar M, Amartey SA, Pohleven F (2006a) Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi. Waste Manage (Oxford) 26(5):459-65 CrossRef
  14. Humar M, Bu?ar B, Pohleven F (2006b) Brown-rot decay of copper-impregnated wood. Int biodeterior biodegrad 58(1):9-4 CrossRef
  15. Inoue M, Norimoto M, Tanahashi M, Rowell RM (1993) Steam or heat fixation of compressed wood. Wood Fiber Sci 25(3):224-35
  16. Jennings JD, Zink-Sharp A, Frazier CE, Kamke FA (2006) Properties of compression densified wood. Part 2: surface energy. J Adhesion Sci Technol 20(4):335-44 CrossRef
  17. Kamke FA, Kutnar A (2011) Influence of stress level on compression deformation of wood in 170?°C transient steam conditions. Wood Mater Sci Eng 6(3):105-11 CrossRef
  18. Kamke FA, Sizemore H (2008) Viscoelastic thermal compression of wood. US Patent Application No. US Patent No. 7.404.422
  19. Koch G, Puls J, Bauch J (2003) Topochemical characterisation of phenolic extractives in discoloured beechwood ( / Fagus sylvatica L.). Holzforschung 57(4):339-45 CrossRef
  20. Kutnar A, Kamke FA (2010) The influence of heat treatment on the set recovery of compressive deformation. In: Teischinger A (ed), Processing technologies for the forest and biobased products industries: PTF BPI 2010. Salzburg University of Applied Sciences. Kuchl. Austria. (Austria: Forschung und Wissenschaft. Technik. 1). Berlin: Lit.: 42-7
  21. Kutnar A, Kamke FA (2012a) Influence of temperature and steam environment on set recovery of compressive deformation of wood. Wood Sci Technol 46(5):953-64 CrossRef
  22. Kutnar A, Kamke FA (2012b) Compression of wood under saturated steam, superheated steam, and transient conditions at 150, 160, and 170. Wood Sci Technol 46(1/3):73-8 CrossRef
  23. Kutnar A, Kamke FA, Petri? M, Sernek M (2008a) The influence of viscoelastic thermal compression on the chemistry and surface energetics of wood. Colloids Surf A: Physicochem Eng Aspects 329:82-6 CrossRef
  24. Kutnar A, Kamke FA, Sernek M (2008b) The mechanical properties of densified VTC wood relevant for structural composites. Holz Roh Werkst 66(6):439-46 CrossRef
  25. Kutnar A, Kamke FA, Sernek M (2009) Density profile and morphology of viscoelastic thermal compressed wood. Wood Sci Technol 43(1):57-8 CrossRef
  26. Kutnar A, Humar M, Kamke FA, ?ernek M (2011) Fungal decay of viscoelastic thermal compressed (VTC) wood. Eur J Wood Prod 69(2):325-28 CrossRef
  27. Navi P, Girardet F (2000) Effects of thermo-hydro-mechanical treatment on the structure and properties of wood. Holzforschung 54(3):287-93 CrossRef
  28. No? L (2006) Comparison of colour measurements with a colorimeter and an optical reader. Graduation thesis. University of Ljubljana. Biotechnical faculty. Ljubljana. 56
  29. Schwarze FWMR, Spycher M (2005) Resistance of thermo-hydro-mechanically densified wood to colonisation and degradation by brown-rot fungi. Holzforschung 59:358-63 CrossRef
  30. Seborg RM, Millet MA, Stamm AJ (1945) Heat-stabilized compressed wood. Staypak. Mechanical Eng. 67:25-1
  31. Skyba O, Niemz P, Schwarze FWMR (2008) Degradation of thermo-hygro-mechanically (THM)-densified wood by soft-rot fungi. Holzforschung 62(3):277-83 CrossRef
  32. Sundqvist B (2004) Colour changes and acid formation in wood during heating. Ph. D. Dissertation. Lule? University of Technology, Division of Wood Material Science, Skellefta, Sweden
  33. Sundqvist B, Morén T (2002) The influence of wood polymers and extractives on wood colour induced by hydrothermal treatment. Holz Roh-Werkst 60:375-76 CrossRef
  34. Sundqvist B, Karlsson O, Westermark U (2006) Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour. strength and hardness. Wood Sci Technol 40(7):549-61 CrossRef
  35. Tjeerdsma BF, Militz H (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz Roh-Werkst 63:102-11 CrossRef
  36. Tjeerdsma BF, Boonastra M, Pizzi A, Tekely P, Militz H (1998) Characterization of thermally modified wood: molecular reasons for wood performance improvement. Holz Roh Werkst 56(3):149-53 CrossRef
  37. Tomak ED, Viitanen H, Yildiz UC et al (2011) The combined effects of boron and oil heat treatment on the properties of beech and Scots pine wood. Part 2: water absorption, compression strength, color changes, and decay resistance. J Mater Sci 46(3):608-15 CrossRef
  38. ünsal O, Kartal SN, Candan Z, Arango R, Clausen CA, Green F (2008) Preliminary investigation of biological resistance. Water absorption and swelling of thermally compressed pine wood panels. IRG/WP; 08-40396. Stockholm. Sweden: IRG Secretariat 11
  39. Varga D, Van der Zee ME (2008) Influence of steaming on selected wood properties of four hardwood species. Holz Roh Werkst 66(1):11-8 CrossRef
  40. Welzbacher CR (2010) TMT—interlab—test to establish suitable quality control techniques—Structure and first results. 2010—IRG/WP 10-40503
  41. Welzbacher CR, Wehsener J, Rapp AO, Haller P (2008) Thermo-mechanical densification combined with thermal modification of Norway spruce ( / Picea abies Karst) in industrial scale—dimensional stability and durability aspects. Holz Roh Werkst 66:39-9 CrossRef
  42. Yildiz S, Gümüskaya E (2007) The effect of thermal modification on crystalline structure of cellulose in soft and hardwood. Build Environ 42:62-7 CrossRef
  
• 作者单位：Bo?tjan Lesar (1)
  Miha Humar (1)
  Frederick A. Kamke (2)
  Andreja Kutnar (3) (4)
  
  1. Biotechnical Faculty, Department of Wood Science and Technology, University of Ljubljana, Jamnikarjeva 101, SI 1001, Ljubljana, Slovenia
  2. Department of Wood Science and Engineering, Oregon State University, 119 Richardson Hall, Corvallis, OR, USA
  3. Andrej Maru?i? Institute, University of Primorska, Muzejski Trg 2, 6000, Koper, Slovenia
  4. ILTRA d.o.o, Celovska Cesta 268, 1000, Ljubljana, Slovenia
  

文摘

Hybrid poplar (Populus deltoides?×?Populus trichocarpa) and Douglas-fir (Pseudotsuga menziesii) wood specimens were densified with three variations of thermo-hydro-mechanical (THM) treatment. The THM treatments differed in the steam environment, including transient steam (TS), saturated steam (SS), and saturated steam with 1-min post–heat treatment at 200?°C (SS+PHT). The bending properties, FTIR spectra, and colour of the THM wood specimens were studied before and after exposure to two different wood decay fungi, brown rot Gloeophyllum trabeum, and white rot Trametes versicolor. The results showed that the performance of densified hybrid poplar wood was considerably poorer than the performance of Douglas-fir heartwood. The FTIR spectra measurements did not show changes in the densified hybrid poplar wood, while some changes were evident in densified Douglas-fir specimens. After fungal degradation, the most prominent changes were observed on the SS+PHT specimens. Colour is one of the most important parameter predominantly influenced by the wood species and the intensity of the densification process for both wood species, while after fungal exposure, the colour of all densified Douglas-fir specimens obtained more or less the same appearance, and densified hybrid poplar specimens resulted in lighter colour tones, indicating that the pattern of degradation of the densified and non-densified specimens are similar. The 3-point bending test results determined that the THM treatment significantly increased the modulus of rupture (MOR) and modulus of elasticity (MOE) of the densified wood specimens, while fungal exposure decreased the MOE and MOR in hybrid poplar and Douglas-fir specimens.