Three-Layer Al/Al–B4C Composite Material Prepared by Casting and Hot Rolling
详细信息 查看全文
- 作者：Yingshui Yu ; Jinchuan Jie ; Shuang Zhang ; Jinghan Tu…
- 关键词：three ; layer composite ; Al ; B 4 C ; hot rolling ; clad ratio
- 刊名：Powder Metallurgy and Metal Ceramics
- 出版年：2015
- 出版时间：November 2015
- 年：2015
- 卷：54
- 期：7-8
- 页码：390-396
- 全文大小：897 KB
- 参考文献：1.F. Yoshid and R. Hino, “Forming limit of stainless steel-clad aluminum sheets under plane stress condition,-J. Mater. Process. Technol., 63, No. 1-, 66-1 (1997).CrossRef
2.W. Miller, L. Zhuang, J. Bottema, A. Wittebrood, P. Smet, et al., “Recent development in aluminum alloys for the automotive industry,-Mater. Sci. Eng.: A, 280, No. 1, 37-9 (2000).CrossRef
3.J. Sun, X. Song, T. Wang, Y. Yu, M. Sun, Z. Cao, and T. Li, “The microstructure and property of Al–Si alloy and Al–Mn alloy bimetal prepared by continuous casting,-Mater. Lett., 67, No. 1, 21-3 (2012).CrossRef
4.F. Thevenot, “A review on boron carbide,-Key Eng. Mater., 56-7, 59-8 (1991).CrossRef
5.T. Chapman, D. Niesz, R. Fox, and T. Fawcett, “Wear-resistant aluminum–boron–carbide cermets for automotive brake applications,-Wear, 236, No. 1-2, 81-7 (1999).CrossRef
6.A. Pyzik and I. Aksay, “Microdesigning of B4C–Al cermets,-in: Processing of Ceramic and Metal Matrix Composites ed. by H. Mostaghaci, Pergamon Press, New York (1989), pp. 269-80.
7.A. Pyzik and D. Beaman, “Al–B–C phase development and effects on mechanical properties of B4C/Al-derived composites,-J.Am. Ceram. Soc., 78, No. 2, 305-12 (1995).CrossRef
8.A. J. Pyzik, I. A. Aksay, and M. Sarikaya, Microdesigning of ceramic-metal composites,-in: Microstructures -6, Vol. 21, Plenum Press, New York (1987), pp. 44-4.
9.G. de With, “High temperature fracture of boron carbide: Experiments and Simple Theoretical Models,-J. Mater. Sci., 19, 457-66 (1984).CrossRef
10.D. Halverson, A. Pyzik, I. Aksay, and W. Snowden, “Processing of boron carbide–aluminum composites,-J. Am. Ceram. Soc., 72, No. 5, 775-80 (1989).CrossRef
11.Li Rongjiu, Ceramic-Metal Composites [in Chinese], Metall. Ind. Press, Beijing, China (1995).
12.G-J. Zhang, Z.-Y. Deng, et al., “Reactive hot-pressing of ZrB2–SiC composites,-J. Am. Ceram. Soc., 83, No. 9, 2330-332 (2000).CrossRef
13.M. Arbatti, X. Shan, and Z-Y. Cheng, “Ceramic–polymer composites with high dielectric constant,-em class="EmphasisTypeItalic ">Adv. Mater., 19, No. 10, 1369-372 (2007).CrossRef
14.H. Ikeda, R. Yoshizaki, K. Yoshikawa, et al., “Preparation of Pb-doped Bi–Sr–Ca–Cu–O superconductors by a hot-press method,-Jpn. J. Appl. Phys., 29, Part 2, No. 3, (1990).
15.Z. Yujun and H. Yiqiang, “Property comparison between cold-press and hot-press clutch friction materials,-Non-Met. Mines, No. 2, 51-3 (2005). - 作者单位：Yingshui Yu (1)
Jinchuan Jie (1)
Shuang Zhang (1)
Jinghan Tu (1)
Tingju Li (1)
1. Laboratory of Special Processing of Raw Materials and School of Material Science and Engineering, Dalian University of Technology, Dalian, China - 刊物类别：Chemistry and Materials Science
- 刊物主题：Chemistry
Characterization and Evaluation Materials
Metallic Materials
Ceramics,Glass,Composites,Natural Materials
Russian Library of Science - 出版者：Springer New York
- ISSN：1573-9066
文摘