Parametric analysis of the end face engagement worm gear

详细信息    查看全文

• 作者：Xingqiao Deng ; Jueling Wang ; Jinge Wang…
• 关键词：worm drive ; end face engagement worm gear ; meshing characteristics ; anti ; backlash
• 刊名：Chinese Journal of Mechanical Engineering
• 出版年：2015
• 出版时间：November 2015
• 年：2015
• 卷：28
• 期：6
• 页码：1177-1185
• 全文大小：2,399 KB
• 参考文献：[1]WANG Jinge, ZHANG Junfu, DENG Xingqiao et al. Parameter optimization of the anti-backlash double-roller enveloping hourglass worm gearing[J]. Journal of Mechanical Engineering, 2010, 46(21): 6鈥?2. (in Chinese)CrossRef
  [2]DENG Xingqiao, WANG Jinge, HORSTEMEYER M F, et al. Parametric study of meshing characteristics with respect to different meshing rollers of the anti-backlash double-roller enveloping worm gear[J]. Journal of Mechanical Design, 2012, 134(8): (081004鈥?)鈥?081004鈥?2).CrossRef
  [3]DENG Xingqiao, WANG Jinge, ZHANG Junfu. The real tooth surface theory study of the non-backlash double-roller enveloping hourglass worm[J]. Journal of Southwest Jiaotong University, 2010, 45(2): 222鈥?26. (in Chinese)MathSciNet
  [4]CHEN Yonghong, ZHANG Guanghui, CHEN Bingkui, et, al. A novel enveloping worm pair via employing the conjugating planar internal gear as counterpart[J]. Mechanism and Machine Theory. 2013, 67(2): 17鈥?1.CrossRef
  [5]MENJAK R, MENJAK D. Gear backlash elimination and justable gear backlash mechanism: USA, 6997076[P]. B2. 2003-2-10. http://鈥媤ww.鈥媑oogle.鈥媍om.鈥媋r/鈥媝atents/鈥婾S20040154422.鈥?/div>
  [6]LUMPKIN T, WOLF T. Methods and apparatus for minimizing backlash in a planetary mechanism: USA, 7121973[P]. 2004-5-5. http://鈥媤ww.鈥媑oogle.鈥媍om.鈥媋r/鈥媝atents/鈥婾S7121973.鈥?/div>
  [7]ASK K, HOJKROGH E N, HAKANSSON N O. Apparatus for reducing gear train backlash: USA, 7086302[P]. 2006-8-8. https://鈥媤ww.鈥媑oogle.鈥媍om/鈥媝atents/鈥婾S7086302.鈥?/div>
  [8]MERZOUKI R, MEDJAHER K, DJEZIRI M A, et al. Backlash fault detection in mechatronic system[J]. Mechatronic, 2007, 17(6): 299鈥?10.CrossRef
  [9]CHEN Qi, MA Yunbo, HUANG Shouwu, et al. Research on gears鈥?dynamic performance influenced by gear backlash based on fractal theory[J]. Applied Surface Science, 2014, 313(1): 325鈥?32.CrossRef
  [10]HONG Lei, WANG Jinge, ZHANG Junfu, et al. Meshing analysis of non-backlash double roller enveloping hourglass worm gearing[J]. Journal of Xihua University, 2008, 27(3): 18鈥?3. (in Chinese)
  [11]DENG Xingqiao, WANG Jinge, ZHANG Junfu. Optimization design of the non-backlash double roller enveloping hourglass worm鈥檚 parameters based on genetic algorithm[J]. Journal of Sichuan University(Engineering Science Edition), 2010, 42(2): 250鈥?54. (in Chinese)MathSciNet
  [12]DENG Xingiqao, XIANG Zhongfan, WANG Jinge. Research on the tooth profile and contact curve of the non-backlash double-roller enveloping hourglass worm with errors[J]. Journal of Xi鈥檃n University, 2011, 45(2): 111鈥?20. (in Chinese)
  [13]BAHK C J, PARKER R G. Analytical investigation of tooth profile modification effects on planetary gear dynamics[J]. Mechanism and Machine Theory, 2013, 70(8): 298鈥?19.CrossRef
  [14]ERITENEL T, PARKER R G. An investigation of tooth mesh nonlinearity and partial contact loss in gear pairs using a lumpedparameter model[J]. Mechanism and Machine Theory, 2012, 56(6): 28鈥?1.CrossRef
  [15]FUJISAWA Y, KOMORI M. Surface finishing method for tooth flank of heat-treated surface-hardened small gears using a gear-shaped tool composed of alumina-fiber-reinforced plastic[J]. Precision Engineering, 2015, 39: 234鈥?2. http://鈥媎x.鈥媎oi.鈥媜rg/鈥?0.鈥?016/鈥媕.鈥媝recisioneng.鈥?014.鈥?0.鈥?03.鈥?span class="Occurrences">CrossRef
  [16]GOLABI S, FESHARAKI J, YAZDIPOOR M. Gear train optimization based on minimum volume/weight design[J]. Mechanism and Machine Theory, 2014, 73(12): 197鈥?17CrossRef
  [17]SIMON V. Influence of tooth errors and misalignments on tooth contact in spiral bevel gears[J]. Mechanism and Machine Theory, 2008, 43(10): 1253鈥?267.CrossRef
  [18]LIN W S, SHIH Y P, LEE J J. Design of a two-stage cycloidal gear reducer with tooth modifications[J]. Mechanism and Machine Theory, 2014, 79(5): 184鈥?7.CrossRef
  [19]CAO Xuemei, FANG Zongde, ZHANG Jinliang, et al. Functionoriented active tooth surface design of spiral bevel gears[J]. Chinese Journal of Mechanical Engineering, 2007, 43(8): 155鈥?58.CrossRef
  [20]SUN Yuehai, LU Huawu, WANG Shuren. Profile of grinding wheel for grinding TI worm[J]. Chinese Journal of Mechanical Engineering, 2008, 44(2): 170鈥?74.MathSciNet CrossRef
  [21]SUN Yuehai, DUAN Luqian, WANG Shuren, et al. Contact performance analysis of double enveloping worm gearing based on contact lines[J]. Chinese Journal of Mechanical Engineering, 2005, 41(6): 44鈥?9.CrossRef
  [22]LI S. Design and strength analysis methods of the trochoidal gear reducers[J]. Mechanism and Machine Theory, 2014, 81(7): 140鈥?54.CrossRef
  [23]LITVIN F, FUENTES A, HAYASAKA K. Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears[J]. Mechanism and Machine Theory, 2006, 41(1): 83鈥?18.CrossRef
  [24]TUNALIO臑LU M 艦, TU脟 B. Theoretical and experimental investigation of wear in internal gears[J]. Wear, 2014, 309(1): 208鈥?15.CrossRef
  [25]SHI Zhaoyao, KANG Yan, LIN Jiachun. Comprehensive dynamics model and dynamic response analysis of a spur gear pair based on gear pair integrated error[J]. Journal of Mechanical Engineering. 2010, 46(17): 55鈥?1.CrossRef
  [26]BAHRAMI GHAHNAVIEH A, AKBARZADEH S, MOSADDEGH P A. Numerical study on the performance of straight bevel gears operating under mixed lubrication regime[J]. Mechanism and Machine Theory, 2014, 75(1): 27鈥?0.CrossRef
  [27]VILMOS V S. Influence of tooth modification on tooth contact in face-hobbed spiral bevel gears[J]. Mechanism and Machine Theory, 2011, 46(12): 1980鈥?998.CrossRef
  [28]WANG Shilong, SUN Shouli, ZHOU Jie, et al. Research on mapping rules of hob geometric errors and gear geometric precision [J]. Journal of Mechanical Engineering, 2013, 49(19): 119鈥?25.CrossRef
  [29]JESPER B. Transmission error in anti-backlash conical involutes gear transmissions: a global鈥攍ocal FE approach[J]. Finite Elements in Analysis and Design, 2005, 41(5): 431鈥?57.CrossRef
  [30]ZHANG Guanghui, WANG Jinge, LONG Rui, et al. The study on rolling cone enveloping hourglass worm gearing[J]. Chinese Journal of Mechanical Engineering, 1993, 16(4): 293鈥?98.
  [31]LITVIN F L, A FUENTES. Gear geometry and applied theory[M]. Cambridge: Cambridge University Press, 2004.CrossRef
  [32]LITVIN F L. Theory of gearing[M]. Washington: NASA Reference Publication 1212, 1989.
  [33]DENG Xingqiao, WANG Jinge, HORSTEMEYER M F, et al. Modification design method for an enveloping hourglass worm with consideration of machining and misalignment errors[J]. Chinese Journal of Mechanical Engineering, 2013, 26(5): 948鈥?56.CrossRef
  
• 作者单位：Xingqiao Deng (1)
  Jueling Wang (2)
  Jinge Wang (1)
  Shouan Chen (1)
  Jie Yang (3)
  
  1. School of Mechanical Engineering and Automation, Xihua University, Chengdu, 610039, China
  2. Department of Mechanical Engineering, Chengdu Industrial Vocational Technical College, Chengdu, 610218, China
  3. School of Manufacturing Science and Engineering, Sichuan University, Chengdu, 610065, China
  
• 刊物主题：Mechanical Engineering; Theoretical and Applied Mechanics; Manufacturing, Machines, Tools; Engineering Thermodynamics, Heat and Mass Transfer; Power Electronics, Electrical Machines and Networks; Electronics and Microelectronics, Instrumentation;
• 出版者：Springer Berlin Heidelberg
• ISSN：2192-8258

文摘

A novel specific type of worm drive, so-called end face engagement worm gear(EFEWD), is originally presented to minimize or overcome the gear backlash. Different factors, including the three different types, contact curves, tooth profile, lubrication angle and the induced normal curvature are taken into account to investigate the meshing characteristics and create the profile of a novel specific type of worm drive through mathematical models and theoretical analysis. The tooth of the worm wheel is very specific with the sine-shaped tooth which is located at the alveolus of the worm and the tooth profile of a worm is generated by the meshing movement of the worm wheel with the sine-shaped tooth, but just the end face of the worm(with three different typical meshing types) is adapted to meshing, and therefore an extraordinary manufacturing methods is used to generate the profile of the end face engagement worm. The research results indicates that the bearing contacts of the generated conjugate hourglass worm gear set are in line contacts, with certain advantages of no-backlash, high precision and high operating efficiency over other gears and gear systems besides the end face engagement worm gear drive may improve bearing contact, reduce the level of transmission errors and lessen the sensitivity to errors of alignment. Also, the end face engagement worm can be easily made with superior meshing and lubrication performance compared with the conventional techniques. In particular, the meshing and lubrication performance of the end face engagement worm gear by using the end face to meshing can be increased over 10% and 7%, respectively. This investigate is expect to provide a new insight on the design of the future no-backlash worm drive for industry. Keywords worm drive end face engagement worm gear meshing characteristics anti-backlash