文摘
Removal of biobutanol from acetone-butanolethanol (ABE) fermentation broth can be achieved by fixed-bed sorption by means of KA-I resin, and the relevant breakthrough curves would provide much valuable information to help design a continuous fixed-bed sorption process in field application. In the present study, the effects of several important design parameters, i.e., initial butanol concentration (C f: 3.0 ?30.0 g/L), inlet flow rate (Q f: 0.5 ?5.5 mL/min) and adsorbent bed height (Z: 4.2 ?18.0 cm), on the adsorption breakthrough curves of KA-I resin in a fixed-bed column were investigated. It was found that the amount of adsorbed butanol at breakthrough point was increased with an increase in the value of C f and Z; and with decrease in the value of Q f. However, the maximum sorption capacities of butanol at saturated point were basically unchanged. Three well-established fixed-bed adsorption models, namely Thomas, Yoon-Nelson and Adams-Bohart, were applied to predict the breakthrough curves and to determine the characteristic parameters of fixed-bed column, which are the basis for the process design at a real scale. Good agreement between the theoretical breakthrough curves and the experimental result were observed using Thomas and Yoon-Nelson models.