Low speed axial compressor stall margin improvement by unsteady plasma actuation

详细信息    查看全文

• 作者：Gang Li (1)
  Yanji Xu (1)
  Lingyuan Yang (1)
  Wei Du (1)
  Junqiang Zhu (1)
  Chaoqun Nie (1)
  
• 关键词：axial compressor ; plasma actuation ; stall margin improvement
• 刊名：Journal of Thermal Science
• 出版年：2014
• 出版时间：April 2014
• 年：2014
• 卷：23
• 期：2
• 页码：114-119
• 全文大小：916 KB
• 参考文献：1. Suder K L, Hathaway M D, Thorp S A, et al, 2001, “Compressor stability enhancement using discrete tip injection,-ASME J. of Turbomachinery, 123(1), 14-3. CrossRef
  2. Nie C, Xu G, Cheng X, et al, 2002, “Micro air injection and its unsteady response in a low-speed axial compressor,-ASME J. of Turbomachinery, 124(4): 572-79. CrossRef
  3. Li Zhi-ping, Gong Zhi-qiang, Liu Yan, et al, 2004, “The experiment research on the performance of low speed axial-compressor by external acoustic excitation,-ASME GT2004-53183, Vienna: American Society of Mechanical Engineers, 2004.
  4. Bae J W, Breuer K S, Tan C S, 2005, -Active control of tip clearance flow in axial compressor,-ASME Journal of Turbomachinery, 2005, 127(2): 352-62. CrossRef
  5. Hathaway, M. D., 2006, “Passive endwall treatments for enhancing stability,-In Von Karman Institute for Fluid Dynamics Lecture Series 2006-06: Advances in Axial Compressor Aerodynamics. Von Karman Institute, Rhode St-Genese, Belgium.
  6. Heinichen F., Gummer V., Schiffer H. P., 2011, “Numerical investigation of a single circumferential groove casing treatment on three different compressor rotors,-ASME Paper, GT 2011-45905, British Columbia, Canada.
  7. Greitzer, E.M., Nikkanen, J.P., Haddad, D.E., Mazzawy, R.S., Joslyn, H.D, 1979, “A Fundamental Criterion for the Application of Rotor Casing treatment,-ASME Journal of Fluid Engineering, Vol. 101, No. 3, p237. CrossRef
  8. Smith, G.D.J., Cumpsty, N.A., 1984, “Flow Phenomena in Compressor Casing Treatment,-Transactions of the ASME, Vol. 106, pp. 532-41. CrossRef
  9. Prince, D.C.Jr., Wisler, D.C., Hilvers, D.E., 1974, “Study of Casing Treatment Stall Margin Improvement Phenomena,-NASA CR-134552.
  10. Osborn, W.M., Lewis, G.L., Heidelberg, L.J., 1971, “Effect of Several Porous Casing Treatments on Stall Limit and on Overall Performance of an Axial-Flow Compressor Rotor,-NASA TND-6537.
  11. Baily E.E., 1972, “Effects of Grooved Casing Treatment on the Flow Range Capability of a Single Stage Axial Flow Compressor,-NASA TMX-2459.
  12. Fujita, H., Takata, H., 1984, “A Study on Configurations of Casing Treatment for Axial Flow Compressors,-Bulletin of JSME, Vol. 27, No. 230, pp.1675-681, Paper No.83-0079. CrossRef
  13. Vo H. D. 2007, “Suppression of short length-scale rotating stall inception with glow discharge actuation,-ASME Paper No. GT2007-27673, Montreal, Canada.
  14. Vo H. D., Cameron J. D., Moris S. C. 2008, “Control of short length-scale rotating stall inception on a high speed axial compressor with plasma actuation,-ASME Paper No. GT2008-50967, Berlin, Germany.
  15. Vo H. D. 2010, “Rotating stall suppression in axial compressors with casing plasma actuation,-Journal of Propulsion and Power, 2010, 26(4): 808-18 CrossRef
  16. Giridhar Jothiprasad, Robert C. M., Katherine Essenhigh, et al. 2012, “Control of tip-clearance flow in a low speed axial compressor rotor with plasma actuation- Journal of Turbomachinery, 2012, Vol. 134,021019: 1-
  17. Suzen Y. B., Huang P. G., Jacob J. D, ea al., 2005, “Numerical simulations of plasma based flow control applications,-AIAA Paper 2005-4633, Toronto, Canada.
  18. Shyy W., Jayaraman B., Anderson A. 2005, “Modeling of glow discharge-induced fluid dynamics,-J. Appl. Phys., 92(11): 6434-443 CrossRef
  19. Vo H D, Tan C H, Greitzer E M. 2005, “Criteria for spike initiated rotating stall- ASME Paper 2005-GT-68374, Reno, Nevada, USA.
  20. Geng Shaojuan, Lin Feng, Zhang Hongwu, et al. 2010, “Characteristics of spike type rotating stall in a low speed isolated axial compressor rotor- Journal of Engineering Thermophysics, 2010, 31(6): 929-32
  
• 作者单位：Gang Li (1)
  Yanji Xu (1)
  Lingyuan Yang (1)
  Wei Du (1)
  Junqiang Zhu (1)
  Chaoqun Nie (1)
  
  1. Institute of Engineering Thermophysics, Chinese Academy of Sciences, P.O. Box 2706, Beijing, 100190, China
  
• ISSN：1993-033X

文摘

This research investigates the use of single dielectric barrier discharge (SDBD) actuators for energizing the tip leakage flow to suppress rotating stall inception and extend the stable operating range of a low speed axial compressor with a single rotor. The jet induced by the plasma actuator adds momentum to the flow in the tip region and has a significant impact on the tip-gap flow. Experiments are carried out on a low speed axial compressor with a single rotor. The static pressure is measured at both the rotor inlet and outlet. The flow coefficient and pressure rise coefficient are calculated. Then the characteristic line is acquired to show the overall performance of the compressor. With unsteady plasma actuation of 18kV and 60W the compressor stability range improvement is realized at rotor speed of 1500 r/min -2400 r/min.