Effect of Heat Treatment on Mechanical Properties and Corrosion Performance of Cold-Sprayed Tantalum Coatings

详细信息    查看全文

• 作者：S. Kumar ; V. Vidyasagar ; A. Jyothirmayi ; S. V. Joshi
• 关键词：cold spray ; corrosion protection ; electrochemical characterization ; heat treatment ; nanoindentation ; scratch or impact loading testing ; tantalum
• 刊名：Journal of Thermal Spray Technology
• 出版年：2016
• 出版时间：April 2016
• 年：2016
• 卷：25
• 期：4
• 页码：745-756
• 全文大小：2,142 KB
• 参考文献：1.J. Yao, L. Yang, B. Li, and Z. Li, Beneficial Effects of Laser Irradiation on the Deposition Process of Diamond/Ni60 Composite Coating with Cold Spray, Appl. Surf. Sci., 2015, 330, p 300CrossRef
  2.N. Kaur, M. Kumar, S.K. Sharma, D.Y. Kim, S. Kumar, N.M. Chavan, S.V. Joshi, N. Singh, and H. Singh, Study of Mechanical Properties and High Temperature Oxidation Behavior of a Novel Cold Spray Ni-20Cr Coating on Boiler Steels, Appl. Surf. Sci., 2015, 328, p 13CrossRef
  3.S.S. Kalsi, T.S. Sidhu, H. Singh, and J. Karthikeyan, Analysis of Material Degradation for Uncoated and NiCoCrAlY Cold Spray Coated Superfer 800 H in the Secondary Chamber of Medical Waste Incinerator, Eng. Fail. Anal., 2014, 46, p 238CrossRef
  4.H.J. Kim, C. Lee, and S.Y. Hwang, Superhard Nano WC-12%Co Coating by Cold Spray Deposition, Mater. Sci. Eng. A, 2010, 31(1), p 244
  5.S.W. Dean, J.K. Potter, R.A. Yetter, T.J. Eden, V. Champagne, and M. Trexler, Energetic Intermetallic Materials Formed by Cold Spray, Intermetallics, 2013, 43, p 121CrossRef
  6.H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Spraying, Acta Mater., 2003, 51(15), p 4379CrossRef
  7.G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56(17), p 4858CrossRef
  8.F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Koçak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200, p 6770CrossRef
  9.R. Morgan, P. Fox, J. Pattison, C. Sutcliffe, and W. O’Neill, Analysis of Cold Gas Dynamically Sprayed Aluminum Deposits, Mater. Lett., 2004, 58, p 1317CrossRef
  10.C.J. Li and W.Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167, p 278CrossRef
  11.S.H. Zahiri, C.I. Antonio, and M. Jahedi, Elimination of Porosity in Directly Fabricated Titanium via Cold Gas Dynamic Spraying, J. Mater. Process. Technol., 2009, 209(2), p 922CrossRef
  12.T.V. Steenkiste and D.W. Gorkiewicz, Analysis of Tantalum Coatings Produced by the Kinetic Spray Process, J. Therm. Spray Technol., 2004, 13(2), p 265CrossRef
  13.C.K.S. Moy, J. Cairney, G. Ranzi, M. Jahedi, and S.P. Ringer, Investigating the Microstructure and Composition of Cold Gas-Dynamic Spray (CGDS) Ti Powder Deposited on Al 6063 Substrate, Surf. Coat. Technol., 2010, 204, p 3739CrossRef
  14.R.R. Chromik, D. Goldbaum, J.M. Shockley, S. Yue, E. Irissou, J.G. Legoux, and N.X. Randall, Modified Ball Bond Shear Test for Determination of Adhesion Strength of Cold Spray Splats, Surf. Coat. Technol., 2010, 205, p 1409CrossRef
  15.J. Wu, H. Fang, H. Kim, and C. Lee, High Speed Impact Behavior of Al Alloy Particle onto Mild Steel Substrate during Kinetic Deposition, Mater. Sci. Eng. A, 2006, 417, p 114CrossRef
  16.J. Wu, J. Yang, H. Fang, S. Yoon, and C. Lee, The Bond Strength of Al-Si Coating on Mild Steel by Kinetic Spraying Deposition, Appl. Surf. Sci., 2006, 252, p 7809CrossRef
  17.L. Ajdelsztajn, A. Zúñiga, B. Jodoin, and E.J. Lavernia, Cold Spray Processing of a Nanocrystalline Al-Cu-Mg-Fe-Ni Alloy with Sc, J. Therm. Spray Technol., 2006, 15(2), p 184CrossRef
  18.L. Zhao, K. Bobzin, D. He, J. Zwick, F. Ernst, and E. Lugscheider, Deposition of Aluminum Alloy Al12Si by Cold Spraying, Adv. Eng. Mater., 2006, 8(4), p 264CrossRef
  19.X.J. Ning, J.H. Kim, H.J. Kim, and C. Lee, Characteristics and Heat Treatment of Cold Sprayed Al-Sn Binary Alloy Coatings, Appl. Surf. Sci., 2009, 255, p 3933CrossRef
  20.K. Spencer, D.M. Fabijanic, and M.X. Zhang, The Use of Al-Al2O3 Cold Spray Coatings to Improve the Surface Properties of Magnesium Alloys, Surf. Coat. Technol., 2009, 204, p 336CrossRef
  21.X. Guo, G. Zhang, W. Li, Y. Gao, H. Liao, and C. Coddet, Investigation of the Microstructure and Tribological Behavior of Cold-Sprayed Tin-Bronze Based Composite Coatings, Appl. Surf. Sci., 2009, 255, p 3822CrossRef
  22.H.J. Kim, C. Lee, and S.Y. Hwang, Superhard Nano WC-12%Co Coating by Cold Spray Deposition, Mater. Sci. Eng. A, 2005, 391, p 243CrossRef
  23.H. Koivuluoto, G. Bolelli, L. Lusvarghi, F. Casadei, and P. Vuoristo, Corrosion Resistance of Cold Sprayed Ta Coatings in Very Aggressive Conditions, Surf. Coat. Technol., 2010, 205, p 1103-1107CrossRef
  24.H. Koivuluoto, J. Näkki, and P. Vuoristo, Corrosion Properties of Cold Sprayed Tantalum Coatings, J. Therm. Spray Technol., 2009, 18(1), p 75-82CrossRef
  25.A. Robin and J.L. Rosa, Corrosion Behavior of Niobium, Tantalum and Their Alloys in Hot Hydrochloric and Phosphoric Acid Solutions, Int. J. Refract. Met. Hard Mater., 2000, 18, p 13-21CrossRef
  26.R. Chandrasekharan, I. Park, R.I. Masel, and M.A. Shannon, Thermal Oxidation of Tantalum Films at Various Oxidation States from 300 to 700 °C, J. Appl. Phys., 2005, 98, p 114908CrossRef
  27.H. Koivuluoto, M. Honkanen, and P. Vuoristo, Cold Sprayed Copper and Tantalum Coatings—Detailed FESEM and TEM Analysis, Surf. Coat. Technol., 2010, 204, p 2353CrossRef
  28.G. Bolelli, B. Bonferroni, H. Koivuluoto, L. Lusvarghi, and P. Vuoristo, Depth-Sensing Indentation for Assessing the Mechanical Properties of Cold-Sprayed Ta, Surf. Coat. Technol., 2010, 205, p 2209CrossRef
  29.T. Stoltenhoff, C. Borchers, F. Gartner, and H. Kreye, Microstructures and Key Properties of Cold Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200, p 4947-4960CrossRef
  30.P.S. Phani, D.S. Rao, S.V. Joshi, and G. Sundararajan, Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Copper Coatings, J. Therm. Spray Technol., 2007, 16(3), p 425CrossRef
  31.G. Sundararajan, P.S. Phani, A. Jyothirmayi, and R.C. Gundakaram, The Influence of Heat Treatment on the Microstructural, Mechanical and Corrosion Behavior of Cold Sprayed SS 316L Coatings, J. Mater. Sci., 2009, 44, p 2320CrossRef
  32.P.S. Phani, V. Vishnukanthan, and G. Sundararajan, Effect of Heat Treatment on Properties of Cold Sprayed Nanocrystalline Copper Alumina Coatings, Acta Mater., 2007, 55, p 4741CrossRef
  33.A.C. Hall, D.J. Cook, R.A. Neiser, T.J. Roemer, and D.A. Hirschfeld, The Effect of a Simple Annealing Heat Treatment on the Mechanical Properties of Cold Sprayed Aluminum, J. Therm. Spray Technol., 2006, 15(2), p 233CrossRef
  34.G. Sundararajan, N.M. Chavan, G. Sivakumar, and P.S. Phani, Evaluation of Parameters for Assessment of Inter-Splat Bond Strength in Cold-Sprayed Coatings, J. Therm. Spray Technol., 2010, 19(6), p 2010CrossRef
  35.F. Gartner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Kocak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200, p 6770CrossRef
  36.N.M. Chavan, B. Kiran, A. Jyothirmayi, P.S. Phani, and G. Sundararajan, The Corrosion Behavior of Cold Sprayed Zinc Coatings on Mild Steel Substrate, J. Therm. Spray Technol., 2013, 22(4), p 463CrossRef
  37.N.M. Chavan, M. Ramakrishna, P.S. Phani, D.S. Rao, and G. Sundararajan, The Influence of Process Parameters and Heat Treatment on the Properties of Cold Sprayed Silver Coatings, Surf. Coat. Technol., 2011, 205, p 4798-4807CrossRef
  38.G. Sundararajan, N.M. Chavan, and S. Kumar, The Elastic Modulus of Cold Spray Coatings: Influence of Inter-splat Boundary Cracking, J. Therm. Spray Technol., 2013, 22(8), p 1348CrossRef
  39.Y. Xiong, G. Bae, X. Xiong, and C. Lee, The Effects of Successive Impacts and Cold Welds on the Deposition Onset of Cold Spray Coatings, J. Therm. Spray Technol., 2010, 19(3), p 575CrossRef
  40.V.K. Champagne, D.J. Helfritch, M.D. Trexler, and B.M. Gabrial, The Effect of Cold Spray Impact Velocity on Deposit Hardness, Model. Simul. Mater. Sci. Eng., 2010, 18, p 065011CrossRef
  41.X. Meng, J. Zhang, J. Zhao, W. Han, Y. Liang, and Y. Liang, Influence of Annealing Treatment on Microstructure and Properties of Cold Sprayed Stainless Steel Coatings, Acta Metall. Sin. (Engl. Lett.), 2011, 24(2), p 99-100
  
• 作者单位：S. Kumar (1)
  V. Vidyasagar (1)
  A. Jyothirmayi (1)
  S. V. Joshi (1)
  
  1. International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, 500 005, India
  
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Surfaces and Interfaces and Thin Films
  Tribology, Corrosion and Coatings
  Materials Science
  Characterization and Evaluation Materials
  Operating Procedures and Materials Treatment
  Analytical Chemistry
  
• 出版者：Springer Boston
• ISSN：1544-1016

文摘

The cold-spray technique is of significant interest to deposit refractory metals with relatively high melting point for a variety of demanding applications. In the present study, mechanical properties of cold-sprayed tantalum coatings heat treated at different temperatures were investigated using microtensile testing, scratch testing, and nanoindentation. The corrosion performance of heat-treated coatings was also evaluated in 1 M KOH solution, and potentiodynamic polarization as well as impedance spectroscopy studies were carried out. Assessment of structure–property correlations was attempted based on microstructure, porosity, and intersplat bonding state, together with mechanical and corrosion properties of the heat-treated cold-sprayed tantalum coatings. Coatings annealed at 1500 °C, which is very close to the recrystallization temperature of tantalum, were found to perform almost as bulk tantalum, with exciting implications for various applications.